8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Fumeo 9119 no audio..where to start trouble shoot

 - UBBFriend: Email this page to someone!    
Author Topic: Fumeo 9119 no audio..where to start trouble shoot
Alan Gouger
Master Film Handler

Posts: 451
From: Florida
Registered: Jun 2003


 - posted December 14, 2015 09:38 PM      Profile for Alan Gouger     Send New Private Message       Edit/Delete Post 
I just received another Fumeo 9119. Everything works but no audio.
First thing I did was to check the fuses and they are fine. All audio settings are as they should be ( I have a few of these so I am very familiar with the machine )
When I turn on the audio amplifier there is no audio hiss and you do not hear it powering up, no hum, nothing it is dead silent. I do not know where to start beyond this point. Appreciate any pointers. Thanks in advance.

 |  IP: Logged

Josef Grassmann
Expert Film Handler

Posts: 190
From: Hennef-Sieg, Germany
Registered: Apr 2005


 - posted December 26, 2015 11:55 AM      Profile for Josef Grassmann   Author's Homepage   Email Josef Grassmann   Send New Private Message       Edit/Delete Post 
Hello,
do you know what amp is built in? Standard was 25W, but 30W also used?
Have you measured contacts of amp on-off switch?
Is 1.5A fuse really intact?
Have you measured 35 Volts at circuit board in?
Is pilot light on?

merry x-mas
Josef

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2