posted February 04, 2016 06:08 PM
Hello My first time on this forum:) I bought a bell and howell 606h 8mm projector on eBay for £20 and everything works on it except for what I believe is called the gate. There is a small bit of spring steel that tensions it and it's broken. I'm not sure what I should do. Could another one be made or be purchased somewhere? I was also given a bell and howell sportster v camera when my grandfather passed and have been keen to use it. Would eBay be the best bet to get some cheap 8mm film. Thanks, Alex
Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007
posted February 05, 2016 06:27 AM
Alex. Welcome to the Forum. I suggest you try to get your money back and invest in a Eumig P8 Novo. Even if you did get your Bell & Howell working you will find it extremely difficult to get the lamps for it, some advertisers are asking £50 each. I attach a link to the Old Film Company who offer 8mm processing, maybe they can also offer raw double 8 film stock. http://www.theoldfilmcompany.com/
posted February 05, 2016 05:04 PM
Thanks for the reply. I just wanted the machine for watching a couple old films. I wanted to see if I could get that little spring steel to get it all working. Regards
Posts: 654
From: Bothell, WA, USA
Registered: Mar 2010
posted February 05, 2016 06:59 PM
You may have to buy another projector of the exact same model to get the part you want. You may get lucky and find one with a good bulb as well.