8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » New Forum Member

 - UBBFriend: Email this page to someone!    
Author Topic: New Forum Member
John E. Kelly
Junior
Posts: 6
From: Decatur, IL, USA
Registered: Jul 2016


 - posted July 09, 2016 11:18 AM      Profile for John E. Kelly   Email John E. Kelly   Send New Private Message       Edit/Delete Post 
Want to introduce myself as a new member of the forum. Have lurked about for a short time before joining. I have only just become re-interested in 8mm film and viewing. As a young kid I did a little, however my meager resources at the time prevented much development. The only thing I remember well is myself and my younger brother loving to have the wits scared out of us from old monster movies.

Have recently come into posession of some films from my uncle who passed away. Mainly Castle Films Sci-Fi and Horror.

As an aging baby boomer there is much nostalgia for me in this. Looking forward to viewing.

Can anyone offer me some advice as to a good all purpose projecter for 8 and Super8? Something easy to operate etc to get me off the ground for starters. I have a screen. Any other supplies that might be needed as I intend on expanding the the number of movies.

Thanks in advance for all help and suggestions.

Best
Jack, my formal name is John but everyone calls me Jack

 |  IP: Logged

Osi Osgood
Film God

Posts: 10204
From: Mountian Home, ID.
Registered: Jul 2005


 - posted July 09, 2016 11:46 AM      Profile for Osi Osgood   Author's Homepage     Send New Private Message       Edit/Delete Post 
Welcome! [Smile]

--------------------
"All these moments will be lost in time, just like ... tears, in the rain. "

 |  IP: Logged

James Wilson
Expert Film Handler

Posts: 230
From: Norwich, UK
Registered: Jan 2015


 - posted July 09, 2016 12:11 PM      Profile for James Wilson   Author's Homepage     Send New Private Message       Edit/Delete Post 
Welcome John,

For a silent Projector I would recommend a Sankyo 2oooH Dualux.
It`s easy to operate plus it will show Standard & Super 8mm films,
There seem quit, a few about just now, good luck,
James.

--------------------
James Wilson

 |  IP: Logged

John E. Kelly
Junior
Posts: 6
From: Decatur, IL, USA
Registered: Jul 2016


 - posted July 09, 2016 01:06 PM      Profile for John E. Kelly   Email John E. Kelly   Send New Private Message       Edit/Delete Post 
James,
Thank you for your response

 |  IP: Logged

Steve Klare
Film Guy

Posts: 7016
From: Long Island, NY, USA
Registered: Jun 2003


 - posted July 09, 2016 01:26 PM      Profile for Steve Klare   Email Steve Klare   Send New Private Message       Edit/Delete Post 
Hi Jack,

Welcome to the 8mm Forum!

I'd suggest you make an early leap to sound. This opens up whole new worlds in film collecting: it's kind of like going from a bike to a car!

(-and I love both bikes and cars!)

I'd suggest Eumig machines in the 800 series (802,807,810) and Elmo machines with the prefix "ST" (ST-180, 600, 800 and maybe even 1200 as an ambitious option)

-all will play silents as well.

If you are prone to travel, search this Forum for "CineSea". (Even if you aren't, enjoy reading about it anyway!)

--------------------
All I ask is a wide screen and a projector to light her by...

 |  IP: Logged

John E. Kelly
Junior
Posts: 6
From: Decatur, IL, USA
Registered: Jul 2016


 - posted July 09, 2016 04:02 PM      Profile for John E. Kelly   Email John E. Kelly   Send New Private Message       Edit/Delete Post 
Thank you Steve. Sound does appear to be a good idea. Just starting out so getting a "car" makes good sense. I had read or heard reference to CineSea and will check it out, or at least read about it for now.

Best
Jack

 |  IP: Logged

Steve Klare
Film Guy

Posts: 7016
From: Long Island, NY, USA
Registered: Jun 2003


 - posted July 09, 2016 04:16 PM      Profile for Steve Klare   Email Steve Klare   Send New Private Message       Edit/Delete Post 
Yes,

What I neglected to tell you here is if you want to play both regular and Super-8 films you'd have to pick and choose the dual gauge machines out among these.

None of the Elmos are.
Some of the Eumigs are. (Model numbers formatted like "Eumig 8**D")

--------------------
All I ask is a wide screen and a projector to light her by...

 |  IP: Logged

Pasquale DAlessio
Film God

Posts: 3523
From: Bristol,RI, USA
Registered: May 2010


 - posted July 09, 2016 04:35 PM      Profile for Pasquale DAlessio     Send New Private Message       Edit/Delete Post 
Welcome!

 |  IP: Logged

Joe Caruso
Film God

Posts: 4105
From: USA
Registered: Jun 2003


 - posted July 09, 2016 06:45 PM      Profile for Joe Caruso     Send New Private Message       Edit/Delete Post 
Jack, Shorty here - Always ready to help with questions on Blcakhawk, Castle and other outfits - Like to invite you to CINESEA in Wildwood NJ, October (have to check the dates) - We talk shop, run films and have a ball - Shorty

 |  IP: Logged

John E. Kelly
Junior
Posts: 6
From: Decatur, IL, USA
Registered: Jul 2016


 - posted July 10, 2016 08:22 AM      Profile for John E. Kelly   Email John E. Kelly   Send New Private Message       Edit/Delete Post 
Thank you Joe "shorty". Hope to learn more as a member here.
Best
Jack

 |  IP: Logged

John E. Kelly
Junior
Posts: 6
From: Decatur, IL, USA
Registered: Jul 2016


 - posted July 13, 2016 07:02 AM      Profile for John E. Kelly   Email John E. Kelly   Send New Private Message       Edit/Delete Post 
I had drawn a bead on a nice new in box Eumig but alas underestimated it's worth and was outbid at the last moment. Still on the hunt for my first projector.

 |  IP: Logged

Steve Klare
Film Guy

Posts: 7016
From: Long Island, NY, USA
Registered: Jun 2003


 - posted July 13, 2016 09:54 AM      Profile for Steve Klare   Email Steve Klare   Send New Private Message       Edit/Delete Post 
You'll get one eventually: they are very common!

What you should be on the lookout for with these is there is kind of a variable speed transmission in there with a rubber surface. When these get old and worn they often lose traction and the machine can't reliably get up to speed (if it runs at all...).

Make sure the seller guarantees the film transport operates OK. Sometimes these machines can be revived...sometimes not.

If you get one of these "I can't test it because I don't have a tape." sellers, don't bet the house on it!

--------------------
All I ask is a wide screen and a projector to light her by...

 |  IP: Logged

Barry Fritz
Phenomenal Film Handler

Posts: 1061
From: Burnsville, MN, USA
Registered: Dec 2009


 - posted July 13, 2016 11:21 AM      Profile for Barry Fritz   Email Barry Fritz   Send New Private Message       Edit/Delete Post 
If you want to find some real life information about a particular projector, (problems etc.), before you buy it, search this forum by model number. For example if you are considering bidding on a Bell & Howell 33st, search for "33st", and read comments regarding it. If you don't get any hits, try adding the make of the projector i.e, Bell 33st". If you add the make right away, you will get tons of hits on models other than the 33st. Good luck and welcome to the forum.

 |  IP: Logged

Jim Schrader
Phenomenal Film Handler

Posts: 1628
From: Savage, MN, USA
Registered: Jun 2003


 - posted July 13, 2016 12:16 PM      Profile for Jim Schrader   Author's Homepage     Send New Private Message       Edit/Delete Post 
welcome

--------------------
jim schrader
"Let's see “do I have that title already?"

 |  IP: Logged

John E. Kelly
Junior
Posts: 6
From: Decatur, IL, USA
Registered: Jul 2016


 - posted July 14, 2016 06:02 AM      Profile for John E. Kelly   Email John E. Kelly   Send New Private Message       Edit/Delete Post 
Thanks for the input fellas. Will update when I get one.

 |  IP: Logged

Jason Smith
Master Film Handler

Posts: 358
From: Tohoku, Japan
Registered: Oct 2015


 - posted July 14, 2016 08:09 AM      Profile for Jason Smith     Send New Private Message       Edit/Delete Post 
Welcome to the forum!

 |  IP: Logged

Douglas Warren
Master Film Handler

Posts: 282
From: West Chester, OH, USA
Registered: Feb 2008


 - posted July 14, 2016 09:33 AM      Profile for Douglas Warren     Send New Private Message       Edit/Delete Post 
Welcome to the forum Jack! Lots of good people and great information here. Ditto on what Steve said regarding an early move to sound. Lots of cool sound movies out just waiting to be purchased!

--------------------
Turn out the lights,the movie is starting!

 |  IP: Logged

Melvin England
Jedi Master Film Handler

Posts: 707
From: Hull, East Yorkshire, UK
Registered: Feb 2016


 - posted July 15, 2016 02:06 PM      Profile for Melvin England     Send New Private Message       Edit/Delete Post 
Welcome Jack - You did similar to what I did. Lurked around in the shadows for a while, reading other people's topics, then decided to take the plunge yourself! I wonder how many more people that applies to?

Just to support Steve's comments earlier, moving over to sound should be the next stage. Steve is a Eumig person, as you may have guessed, but I am a Sankyo person. Any of their sound projectors - 500 - 700 or 800 ranges would serve you well. The mother of all projectors is usually considered to be the Elmo GS1200.... but one step at a time!

--------------------
"My name is for my friends!"

 |  IP: Logged

Andrew Woodcock
Film God

Posts: 7477
From: Manchester Uk
Registered: Aug 2012


 - posted July 15, 2016 02:15 PM      Profile for Andrew Woodcock         Edit/Delete Post 
Mother F#@¥er maybe Melvin! [Big Grin] [Big Grin] [Wink]

--------------------
"C'mon Baggy..Get with the beat"

 |  IP: Logged

Steve Klare
Film Guy

Posts: 7016
From: Long Island, NY, USA
Registered: Jun 2003


 - posted July 15, 2016 02:17 PM      Profile for Steve Klare   Email Steve Klare   Send New Private Message       Edit/Delete Post 
That's funny, Melvin!

-an old friend of mine would have called me an "Elmoaner"! He was a Eumig man basically from his bone marrow on out!

(Are you happy now, Tim?)

I'm really kind of Ecumenical about this: the reason my Avatar has me standing is front of the ELMO building is their US Headquarters is about 10 miles away. (If it said "Eumig"...).

-whatever works...

I've actually been pretty lucky: I've never had a disastrous projector, so I'm of no mind to dispute what other people like using that I haven't even tried.

-But sound is at least the icing on the cake. It comes pretty close to being the flavor in the cake!

--------------------
All I ask is a wide screen and a projector to light her by...

 |  IP: Logged

Andrew Woodcock
Film God

Posts: 7477
From: Manchester Uk
Registered: Aug 2012


 - posted July 15, 2016 04:14 PM      Profile for Andrew Woodcock         Edit/Delete Post 
Steve, if you'd like a taste of disaster, try a Cinerex!
Half hour is all it takes! [Big Grin] [Big Grin] [Wink]

--------------------
"C'mon Baggy..Get with the beat"

 |  IP: Logged

Melvin England
Jedi Master Film Handler

Posts: 707
From: Hull, East Yorkshire, UK
Registered: Feb 2016


 - posted July 15, 2016 05:44 PM      Profile for Melvin England     Send New Private Message       Edit/Delete Post 
......or a Royale! Both could be obtained in their day from one of those newspaper adverts.... and when it arrived.... it was a glorified toy with a 10w bulb you use in an editing machine.

--------------------
"My name is for my friends!"

 |  IP: Logged

Andrew Woodcock
Film God

Posts: 7477
From: Manchester Uk
Registered: Aug 2012


 - posted July 15, 2016 05:52 PM      Profile for Andrew Woodcock         Edit/Delete Post 
Like a paper shreader now,except for plastic film! [Big Grin] [Big Grin] [Wink]

There are some truly shocking disastrous examples out there if you have the inclination to pursue any of them.

Not all of them cheap imitators either!

--------------------
"C'mon Baggy..Get with the beat"

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2