8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Cleaning the film gate on Bolex cameras

 - UBBFriend: Email this page to someone!    
Author Topic: Cleaning the film gate on Bolex cameras
Carl Richards
Junior
Posts: 6
From: Newcastle, England
Registered: Aug 2017


 - posted October 18, 2017 06:17 AM      Profile for Carl Richards   Email Carl Richards   Send New Private Message       Edit/Delete Post 
Hi. I have a Bolex C8 and a B8 camera. I have had film back from the C8 and it is obvious that the gate needs cleaning. However, I can't seem to get a brush in there, and the gate is so small, it is difficult to tell if it is clean or not.

Can anyone give me any pointers, or explain how they do it?

Thanks very much.

Regards

Carl

 |  IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007


 - posted October 18, 2017 09:44 AM      Profile for Maurice Leakey   Email Maurice Leakey   Send New Private Message       Edit/Delete Post 
Page 29 from Instruction Book:-

1) Open the pressure-pad by moving lever
2) Remove the pressure-pad by pulling it towards you
3) Using a clean cloth around the end of a small wooden stick clean the pad gently, particularly around the taking aperture. If any deposit is sticky and hard to remove moisten the cloth slightly
4) Put the pressure-pad back into place by carefully introducing it at an angle. Check it is in the correct position
5) Close the pressure pad by pushing the lever back into position.

--------------------
Maurice

 |  IP: Logged

Carl Richards
Junior
Posts: 6
From: Newcastle, England
Registered: Aug 2017


 - posted October 18, 2017 03:41 PM      Profile for Carl Richards   Email Carl Richards   Send New Private Message       Edit/Delete Post 
Maurice,

Thanks for that.

I have had a bash at this tonight and the issue is that the gate is so tiny, even magnified it is difficult to see that the edges are clean. I have used orange wood sticks and a Giotto blower and I think I have done it (but can't be 100% sure).

Regards

Ark

 |  IP: Logged

Paul Adsett
Film God

Posts: 5003
From: USA
Registered: Jun 2003


 - posted October 18, 2017 04:45 PM      Profile for Paul Adsett     Send New Private Message       Edit/Delete Post 
Unscrew the lens and then use a compressed air can to blast air through the gate aperture.

--------------------
The best of all worlds- 8mm, super 8mm, 9.5mm, and HD Digital Projection,
Elmo GS1200 f1.0 2-blade
Eumig S938 Stereo f1.0 Ektar
Panasonic PT-AE4000U digital pj

 |  IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007


 - posted October 19, 2017 02:29 AM      Profile for Maurice Leakey   Email Maurice Leakey   Send New Private Message       Edit/Delete Post 
I am sure members are well aware of my comments about compressed air cans.
They contain a combination of under pressure gases which I would never use within a camera or projector.

--------------------
Maurice

 |  IP: Logged

Paul Adsett
Film God

Posts: 5003
From: USA
Registered: Jun 2003


 - posted October 19, 2017 07:22 AM      Profile for Paul Adsett     Send New Private Message       Edit/Delete Post 
Maurice, I can appreciate the danger in using compressed air around lenses ( possible damage to coatings), but do not understand what the danger is around a mechanism. Seems to me that totally removing the lens from the camera before blowing out the gate eliminates any possible danger. Plus I buy my compressed air from a camera shop.

--------------------
The best of all worlds- 8mm, super 8mm, 9.5mm, and HD Digital Projection,
Elmo GS1200 f1.0 2-blade
Eumig S938 Stereo f1.0 Ektar
Panasonic PT-AE4000U digital pj

 |  IP: Logged

David Roberts
Master Film Handler

Posts: 405
From: Suffolk. England
Registered: Apr 2004


 - posted October 19, 2017 07:28 AM      Profile for David Roberts     Send New Private Message       Edit/Delete Post 
Carl,
I had a bolex pocket camera years ago and didn't know the pressure pad just pulls out for cleaning. once you do this,a soft brush should be all it takes,check with a loup magnifier and you will be ok.

 |  IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007


 - posted October 19, 2017 09:35 AM      Profile for Maurice Leakey   Email Maurice Leakey   Send New Private Message       Edit/Delete Post 
I personally, would not use cans of compressed air as they contain gasses compressed into liquids which might coat the gate in some way.
Even more to clean !!

--------------------
Maurice

 |  IP: Logged

Carl Richards
Junior
Posts: 6
From: Newcastle, England
Registered: Aug 2017


 - posted October 19, 2017 09:54 AM      Profile for Carl Richards   Email Carl Richards   Send New Private Message       Edit/Delete Post 
Maurice,

Yes I used a can of compressed air on an a games console a while back and it did coat the fan vents in a layer of residue, so I would agree that it is not suitable for use with film cameras.

Regards

Carl

 |  IP: Logged

Paul Adsett
Film God

Posts: 5003
From: USA
Registered: Jun 2003


 - posted October 19, 2017 12:29 PM      Profile for Paul Adsett     Send New Private Message       Edit/Delete Post 
The air can I use says" moisture and residue free. I tested it by spraying on a sheet of paper and there was nothing. So clearly all air sprays are not equal. I shall continue to use the brand I buy for blowing out my projector gates (after first removing the lens), as it seems to be the only way to get a totally clean gate aperture edge.

--------------------
The best of all worlds- 8mm, super 8mm, 9.5mm, and HD Digital Projection,
Elmo GS1200 f1.0 2-blade
Eumig S938 Stereo f1.0 Ektar
Panasonic PT-AE4000U digital pj

 |  IP: Logged

Dominique De Bast
Film God

Posts: 4486
From: Brussels, Belgium
Registered: Jun 2013


 - posted October 19, 2017 12:38 PM      Profile for Dominique De Bast   Email Dominique De Bast   Send New Private Message       Edit/Delete Post 
Paul, that's correct, they are not all equals. Some state clearly that they are not intended for photo material. The trouble is that sometimes nothing is specified and you don't know.

--------------------
Dominique

 |  IP: Logged

Bryan Chernick
Jedi Master Film Handler

Posts: 654
From: Bothell, WA, USA
Registered: Mar 2010


 - posted October 19, 2017 11:59 PM      Profile for Bryan Chernick   Email Bryan Chernick   Send New Private Message       Edit/Delete Post 
I clean mine like Maurice described after every roll. Get all the edges and you should be good. I wet it with rubbing alcohol and also clean the pressure plate while I have it out. Before putting the pressure plate back I rub some oil on my finger from the side of my nose and rub it on the pressure plate for lubrication. That’s an old cameramans trick that I read about years ago.

 |  IP: Logged

Dominique De Bast
Film God

Posts: 4486
From: Brussels, Belgium
Registered: Jun 2013


 - posted October 20, 2017 01:13 AM      Profile for Dominique De Bast   Email Dominique De Bast   Send New Private Message       Edit/Delete Post 
Bryan, I always heard that oil should be avoided on film.

--------------------
Dominique

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2