8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Eumig Mark S 807D washer and retainer clip

 - UBBFriend: Email this page to someone!    
Author Topic: Eumig Mark S 807D washer and retainer clip
Bradford A Moore
Master Film Handler

Posts: 272
From: Provincetown, Ma
Registered: Jul 2005


 - posted June 25, 2017 04:53 PM      Profile for Bradford A Moore     Send New Private Message       Edit/Delete Post 
Hey All,

I'm looking for a washer and retainer clip for the function cam that sits underneath the function switch of a Eumig Mark S 807D?

 |  IP: Logged

Steve Klare
Film Guy

Posts: 7016
From: Long Island, NY, USA
Registered: Jun 2003


 - posted June 27, 2017 03:39 PM      Profile for Steve Klare   Email Steve Klare   Send New Private Message       Edit/Delete Post 
Hey Brad,

Does the retainer clip you need look like this?

 -

(-is it supposed to snap into a slot in the shaft?)

--------------------
All I ask is a wide screen and a projector to light her by...

 |  IP: Logged

Bradford A Moore
Master Film Handler

Posts: 272
From: Provincetown, Ma
Registered: Jul 2005


 - posted June 27, 2017 05:21 PM      Profile for Bradford A Moore     Send New Private Message       Edit/Delete Post 
Hi Steve,

I'm not sure. I'm going with what the guy told me who is working on it. He said I may even need the the light pin too, which controls the light switch. He took the clip, and washer from the bottom to see if that would help temporarily. It did for a few days, and then went out again. If you have the clip. washer, and pin that would be great. Or any of these, that would help. Watching the image with that lens for a few days, was great.

 |  IP: Logged

Steve Klare
Film Guy

Posts: 7016
From: Long Island, NY, USA
Registered: Jun 2003


 - posted June 27, 2017 07:08 PM      Profile for Steve Klare   Email Steve Klare   Send New Private Message       Edit/Delete Post 
I don't have these parts, but I'm trying to see if there is something generic you can grab at a hardware or auto parts store that will do the job.

--------------------
All I ask is a wide screen and a projector to light her by...

 |  IP: Logged

Bradford A Moore
Master Film Handler

Posts: 272
From: Provincetown, Ma
Registered: Jul 2005


 - posted June 27, 2017 08:07 PM      Profile for Bradford A Moore     Send New Private Message       Edit/Delete Post 
Thanks!

 |  IP: Logged

Steve Klare
Film Guy

Posts: 7016
From: Long Island, NY, USA
Registered: Jun 2003


 - posted June 27, 2017 10:17 PM      Profile for Steve Klare   Email Steve Klare   Send New Private Message       Edit/Delete Post 
We do what we can!

--------------------
All I ask is a wide screen and a projector to light her by...

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2