8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Hand rewinders (Page 1)

 - UBBFriend: Email this page to someone!  
This topic comprises 2 pages: 1  2 
 
Author Topic: Hand rewinders
Graham Ritchie
Film God

Posts: 4001
From: New Zealand
Registered: Feb 2006


 - posted February 22, 2018 04:12 PM      Profile for Graham Ritchie   Email Graham Ritchie   Send New Private Message       Edit/Delete Post 
Just a quick check how many of you use hand rewinders for your films? me, well I would never rewind films any other way and always wind by hand.... except on 35mm [Smile]

 |  IP: Logged

David Hardy
Jedi Master Film Handler

Posts: 955
From: Johnshaven Village , Montrose, Scotland
Registered: Jan 2015


 - posted February 22, 2018 04:15 PM      Profile for David Hardy     Send New Private Message       Edit/Delete Post 
Graham ... I am an ex pro projectionist so like you its manual hand rewinders for me every time. Even on 35mm film.

Same for print checking and make up.

I guess some really good habits are hard to break. [Smile]

--------------------
" My equipment's more important than your rats. "

 |  IP: Logged

Dominique De Bast
Film God

Posts: 4486
From: Brussels, Belgium
Registered: Jun 2013


 - posted February 22, 2018 04:27 PM      Profile for Dominique De Bast   Email Dominique De Bast   Send New Private Message       Edit/Delete Post 
I use external rewinders as well (except when I'm too lazzy I have to confess). You must use them anyway when you clean your films, so why not when you rewind after a projection ?

--------------------
Dominique

 |  IP: Logged

Tom Photiou
Film God

Posts: 4837
From: Plymouth U.K
Registered: Dec 2003


 - posted February 22, 2018 04:51 PM      Profile for Tom Photiou     Send New Private Message       Edit/Delete Post 
i bench rewind always for both 8 and 16mm, over the years a lot of wear is surly saved on the projector.

[ February 23, 2018, 01:15 AM: Message edited by: Tom Photiou ]

 |  IP: Logged

Bill Phelps
Phenomenal Film Handler

Posts: 1482
From: USA
Registered: Jan 2009


 - posted February 22, 2018 05:10 PM      Profile for Bill Phelps     Send New Private Message       Edit/Delete Post 
I only rewind on the 16mm projector, never on super 8. Every print I get goes on the bench for inspection and cleaning before projection. Regular 8 gets hand rewound on the projector.....the beautiful Bolex M8! [Smile]

 |  IP: Logged

Chip Gelmini
Phenomenal Film Handler

Posts: 1733
From: Brooksville, FL
Registered: Jun 2003


 - posted February 22, 2018 05:53 PM      Profile for Chip Gelmini     Send New Private Message       Edit/Delete Post 
I have always rewound film by hand because you know usually I am in a cranky mood

 |  IP: Logged

Daniel Macarone
Expert Film Handler

Posts: 224
From: Summit NJ, USA
Registered: Nov 2015


 - posted February 22, 2018 06:59 PM      Profile for Daniel Macarone   Author's Homepage     Send New Private Message       Edit/Delete Post 
For Super 8, I always rewind on my pair of Elmo rewinds. They clamp onto a table and they can fit a 15" reel, which can be up to 2300', even though it says 1200' on the packaging.

For 16mm, I don't rewind at all ... and I don't project at all either, but that's because I have not been ready to collect that format yet. When I am ready, I will get Moviola 35mm rewinds, not that I will buy 35mm films, but to have sturdy, high quality rewinds to adapt for 8 & 16mm.

 |  IP: Logged

Bill Brandenstein
Phenomenal Film Handler

Posts: 1632
From: California
Registered: Aug 2007


 - posted February 22, 2018 09:22 PM      Profile for Bill Brandenstein   Email Bill Brandenstein   Send New Private Message       Edit/Delete Post 
I'm just an old crank too!

 |  IP: Logged

Graham Ritchie
Film God

Posts: 4001
From: New Zealand
Registered: Feb 2006


 - posted February 22, 2018 11:15 PM      Profile for Graham Ritchie   Email Graham Ritchie   Send New Private Message       Edit/Delete Post 
Tom

You hit the nail on the head [Smile] If folk want there precious GS1200 projector gears etc to last, then dont put strain on those little plastic gears at the back of those arms that are prone to cracking, however I understand you can still buy them [Big Grin]

The best thing I ever bought, was a pair of Shinko clamp on 8/16mm hand winders. I would be lost without them [Smile]

 |  IP: Logged

Clinton Hunt
Jedi Master Film Handler

Posts: 845
From: Waharoa,North Island,New Zealand
Registered: May 2010


 - posted February 23, 2018 04:29 AM      Profile for Clinton Hunt   Author's Homepage     Send New Private Message       Edit/Delete Post 
Yeah I’m the same as Bill,I use my Bolex M8 to watch my Standard 8mm silent films on and use the crank handle to rewind all the films,it can be done with the motor by attaching a spring band,but I don’t want to [Smile]

--------------------
Cheers from me in New Zealand :-)

 |  IP: Logged

Terry Sills
Phenomenal Film Handler

Posts: 1423
From: Weymouth,Dorset,England
Registered: Oct 2012


 - posted February 23, 2018 05:12 AM      Profile for Terry Sills     Send New Private Message       Edit/Delete Post 
Always - quicker,safer and less wear and tear on the projector.

 |  IP: Logged

James Wilson
Expert Film Handler

Posts: 230
From: Norwich, UK
Registered: Jan 2015


 - posted February 23, 2018 07:13 AM      Profile for James Wilson   Author's Homepage     Send New Private Message       Edit/Delete Post 
I always use a rewinder for cleaning & assessing 16mm super8 & Standard 8mm film.
Fro me it`s a must have.
James.

--------------------
James Wilson

 |  IP: Logged

Rich Malmsten
Film Handler

Posts: 41
From: White Bear Lake, MN, USA
Registered: Feb 2017


 - posted February 23, 2018 11:13 AM      Profile for Rich Malmsten   Email Rich Malmsten   Send New Private Message       Edit/Delete Post 
For those of you who rewind manually, are you primarily talking about large reels, or do you manually rewind 200 and 400 ft reels, too? I never considered the small reels to be an issue, but maybe I should reconsider.

Do you have multiple auto takeup reels, you can show five or six cartoons in a row without having to rewind and take them off before showing the next one?

 |  IP: Logged

Graham Ritchie
Film God

Posts: 4001
From: New Zealand
Registered: Feb 2006


 - posted February 23, 2018 11:35 AM      Profile for Graham Ritchie   Email Graham Ritchie   Send New Private Message       Edit/Delete Post 
Hi Rich

I use the hand rewinders for all size of film reels, it only takes a couple of minutes to rewind by hand. If I was to put a film show on for others, then I use the hand rewinders to join the films together, removing the heads and tails to give a seamless flow, from one film to the next without stopping. I dont lose any frames either, as I simply peel away the splice to re-attach the leaders when I am finished. I do have set reels put aside on 800ft or 1200ft that have a film programme of shorts.

I find the hand rewinders a very valuable tool [Smile]

 |  IP: Logged

David Hardy
Jedi Master Film Handler

Posts: 955
From: Johnshaven Village , Montrose, Scotland
Registered: Jan 2015


 - posted February 23, 2018 02:42 PM      Profile for David Hardy     Send New Private Message       Edit/Delete Post 
No matter what size a reel of film is I make 'em up and break 'em down on manual rewind arms. Its that simple. [Big Grin]

--------------------
" My equipment's more important than your rats. "

 |  IP: Logged

Edwin van Eck
Master Film Handler

Posts: 312
From: Tilburg, Netherlands
Registered: Feb 2015


 - posted February 26, 2018 08:58 AM      Profile for Edwin van Eck   Author's Homepage     Send New Private Message       Edit/Delete Post 
We always use handrewinders for cleaning film and checking for defects in splicer before we project or digitize films.

These handrewinders are harder to get and therefore we have decided to start manufacturing these again. We are using these ourselves know for some time to great satisfaction.

Soon we will add these to our webshop!

Here a preview already:
 -

We use adaptors for super8 and 9,5mm films, see:
https://winkel.van-eck.net/PP-0038-S--viewers.html

--------------------
Edwin van Eck
Van Eck Video Services

 |  IP: Logged

Mathew James
Jedi Master Film Handler

Posts: 740
From: Hamilton, Ontario, Canada
Registered: Dec 2014


 - posted February 26, 2018 09:04 AM      Profile for Mathew James   Email Mathew James   Send New Private Message       Edit/Delete Post 
I like those alot Edwin!
I like the table mount on these. I still keep hoping I will find a nice set of rewinders locally, but so far no luck, so I will look into these when you have them on the webshop. Thx for showing us these.

--------------------
--
Cheers,
Matt 📽

 |  IP: Logged

Edwin van Eck
Master Film Handler

Posts: 312
From: Tilburg, Netherlands
Registered: Feb 2015


 - posted June 19, 2018 08:09 AM      Profile for Edwin van Eck   Author's Homepage     Send New Private Message       Edit/Delete Post 
Our newly produced film rewinders are now ready and for sale!

See: https://shop.van-eck.net/RW-0062.html?_globalsearch=rw-600m

 -

Film rewinder Van Eck RW-600M (new

Film rewinder for 8mm, 9,5 and 16mm films

Specifications:
* For reels up to 600 meters (2000 ft)
* Can be attached to table with included table clamps

* For regular8 and 16mm films
* For super8 films using optional adapters (PP-0038-S)
* For 9,mm films using optional adapter (PP-0038-9)

* Runs very Smoothly
* Film reel rotates in same direction as winder handle
* Transmission: 1:3

Materiaal:
- aluminum frame
- steel and nylon parts

Dimensions: 11 x 6 x 23 cm
Weight 1150 grams

Design and fabrication by 3dformadesign.nl
Made in the Netherlands

--------------------
Edwin van Eck
Van Eck Video Services

 |  IP: Logged

Mike Spice
Master Film Handler

Posts: 421
From: none of your business
Registered: Jun 2017


 - posted June 20, 2018 06:43 AM      Profile for Mike Spice     Send New Private Message       Edit/Delete Post 
hand rewind every time.

 |  IP: Logged

Nantawat Kittiwarakul
Master Film Handler

Posts: 280
From: Rajburana, Bangkok, Thailand
Registered: Aug 2017


 - posted June 20, 2018 11:08 PM      Profile for Nantawat Kittiwarakul   Email Nantawat Kittiwarakul   Send New Private Message       Edit/Delete Post 
A little dirty secret... [Big Grin]

Since I already have a pair of 35mm film gauge rewinds on my desk. Found out that with a pair of Super8 >> Regular8 hub adapter,I can (somewhat) brute-force S8 reels to fit on my 35mm rewinds. And yes it works flawlessly,sort of.

With further slight modification it'll even accept 16mm reels too. Hence a pair of all-in-one rewinds. [Smile]

--------------------
Just a lone collector from a faraway land...

 |  IP: Logged

Steven J Kirk
Jedi Master Film Handler

Posts: 873
From: Southern England
Registered: Apr 2008


 - posted June 21, 2018 08:14 AM      Profile for Steven J Kirk   Email Steven J Kirk   Send New Private Message       Edit/Delete Post 
Thomas 16mm rewinds screwed to a board. The Wittner chrome Super 8 adapters go on these perfectly and match as if original to them.

--------------------
VistaVision
Motion Picture High-Fidelity

 |  IP: Logged

Winbert Hutahaean
Film God

Posts: 5468
From: Nouméa, New Caledonia
Registered: Jun 2003


 - posted June 22, 2018 07:45 PM      Profile for Winbert Hutahaean     Send New Private Message       Edit/Delete Post 
I am considered my self as still young. At least according to the UN standard [Razz]

But I never ever rewind my film (any size) hand cranked...it is too tiring. I knew rewinding on the machine will damage some gears inside...so I just bought a cheap projector to do the job.

But comes to my mind now what is the other point to hand crank rewinding films other than protecting the gears?

--------------------
Winbert

 |  IP: Logged

Tom Photiou
Film God

Posts: 4837
From: Plymouth U.K
Registered: Dec 2003


 - posted June 23, 2018 12:55 PM      Profile for Tom Photiou     Send New Private Message       Edit/Delete Post 
mainly for inspecting etc, you control the speed and tension at which you rewind. It's also a lot faster and, (im guessing), over many years it must save a lot of wear and tear on all the moving parts of any projector.
For 16mm, i would use no other option for rewinding / cleaning
[Wink]

 |  IP: Logged

Ken Finch
Jedi Master Film Handler

Posts: 543
From: Herne Bay, Kent. U.K.
Registered: Oct 2011


 - posted June 23, 2018 01:22 PM      Profile for Ken Finch   Email Ken Finch   Send New Private Message       Edit/Delete Post 
I have and use Thomas rewinders for 16 and 9.5mm films mounted on a board with a Haynor 9.5mm viewer in between. I also use this for editing of course! For the 8mm gauges I have acquired 3 editor /viewers which I also use when cleaning and joining. I also use projectors for rewinding but usually if I am only screening one reel. I may have never been a professional projectionist but I learned the "right" way to treat films many years ago!! I may add that I really dislike self threading projectors. I wonder how many of you agree with me about that one! Ken Finch. [Smile]

 |  IP: Logged

Paul Adsett
Film God

Posts: 5003
From: USA
Registered: Jun 2003


 - posted June 23, 2018 02:22 PM      Profile for Paul Adsett     Send New Private Message       Edit/Delete Post 
Have to agree with you about auto thread projectors Ken. None of them are 100% reliable, although some do have a pretty high threading success rate. But it only takes one mis-thread to scratch a film, sometimes the whole reel. Nothing beats manual threading.

--------------------
The best of all worlds- 8mm, super 8mm, 9.5mm, and HD Digital Projection,
Elmo GS1200 f1.0 2-blade
Eumig S938 Stereo f1.0 Ektar
Panasonic PT-AE4000U digital pj

 |  IP: Logged



All times are Central
This topic comprises 2 pages: 1  2 
 
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2