8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Eumig MARK S 710D

 - UBBFriend: Email this page to someone!    
Author Topic: Eumig MARK S 710D
Roderick Downes
Junior
Posts: 6
From: Chelmsford, England
Registered: Sep 2018


 - posted October 15, 2018 05:36 AM      Profile for Roderick Downes   Email Roderick Downes   Send New Private Message       Edit/Delete Post 
Has anyone got a free download for the Eumig MARK S 710D instruction book????

 |  IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007


 - posted October 15, 2018 02:50 PM      Profile for Maurice Leakey   Email Maurice Leakey   Send New Private Message       Edit/Delete Post 
Roderick

This may help you.

https://www.youtube.com/watch?v=_LahQdNeCwc

However, note that the gentleman does not know about the loop size needed. He has laced a Super 8 film and being guided with the guide for the standard/regular 8 film which uses a larger loop than the Super 8.

The Super 8 guide is shown more to the left and provides a much shorter loop.

The film lacing as shown will not give the correct separation for the picture to sound and therefore the sound will be out of sync with the picture.

--------------------
Maurice

 |  IP: Logged

Will Trenfield
Jedi Master Film Handler

Posts: 506
From: Shrewsbury, Shropshire, UK
Registered: Mar 2016


 - posted October 15, 2018 05:30 PM      Profile for Will Trenfield   Email Will Trenfield   Send New Private Message       Edit/Delete Post 
I used to have a S 710D. It has automatic threading but you must keep the threading latch at the front of the machine pressed until the film reaches the take up reel otherwise it will chew up the film. When changing the gates, you must ensure that the red spot on the inching knob at the rear of the projector is in the 12 o'clock position to avoid damaging the claw. I run a S 712D now which is the model shown in the video.

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2