8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » The HOT Motor. Problem!

 - UBBFriend: Email this page to someone!    
Author Topic: The HOT Motor. Problem!
Leon Norris
Jedi Master Film Handler

Posts: 958
From: Elkins Park, PA, USA
Registered: Jun 2012


 - posted February 13, 2019 10:36 AM      Profile for Leon Norris   Email Leon Norris   Send New Private Message       Edit/Delete Post 
To all GS1200 Owners. I ran across this problem a lot! The motors with the removable brushes! In the older models! The motors will get real HOT! Then burn out. If you don't change those brushes.These machines are getting old now! Things are starting to go. So to check the brushes. You have to remove the black caps. Top and bottom. Then pull the brushes out gently! If they look worn ,run down then replace! Also when brushes are out take A cotton swab dipped in alcohol. And stick in the brush opening and take your hand and turn the fan to clean it. Do the top and bottom. You use a few swabs to get it nice and clean! Once it is clean then put the brushes back in! So keep a eye on it!

 |  IP: Logged

Maurizio Di Cintio
Jedi Master Film Handler

Posts: 977
From: Ortona, Italy
Registered: Jan 2004


 - posted February 13, 2019 11:56 AM      Profile for Maurizio Di Cintio     Send New Private Message       Edit/Delete Post 
Thank you Leon. But what does a worn out brush look like? And what do you mean with "run down"? Is it possible to rverse the brush? Thank you.

--------------------
Maurizio

 |  IP: Logged

Paul Adsett
Film God

Posts: 5003
From: USA
Registered: Jun 2003


 - posted February 13, 2019 12:07 PM      Profile for Paul Adsett     Send New Private Message       Edit/Delete Post 
Leon, do you supply replacement brushes?

--------------------
The best of all worlds- 8mm, super 8mm, 9.5mm, and HD Digital Projection,
Elmo GS1200 f1.0 2-blade
Eumig S938 Stereo f1.0 Ektar
Panasonic PT-AE4000U digital pj

 |  IP: Logged

Leon Norris
Jedi Master Film Handler

Posts: 958
From: Elkins Park, PA, USA
Registered: Jun 2012


 - posted February 13, 2019 12:11 PM      Profile for Leon Norris   Email Leon Norris   Send New Private Message       Edit/Delete Post 
Maurizio, when you check the brushes. To tell if they are worn the bottom of the brushes will not be smooth. They will have a Grove worn in them. When they are worn to bad it can burn out the motor! The motor will get hot and smell! Older model people keep a eye on it!

 |  IP: Logged

Leon Norris
Jedi Master Film Handler

Posts: 958
From: Elkins Park, PA, USA
Registered: Jun 2012


 - posted February 13, 2019 04:37 PM      Profile for Leon Norris   Email Leon Norris   Send New Private Message       Edit/Delete Post 
Paul, I have to check and see if I have any left! Elmo changed the motors to the brushless ones. That went in the newer models.All motors I have left are new for the newer models GS1200. I have two used motors that are for older models. And they work very good! One good thing about the brush motors they can last for YEARS! I know I have plenty of brushes for the fan motors. I replaced plenty of them in the past! The fan motor go a lot faster than the main motors! We have to do our best to keep these machines going!

 |  IP: Logged

Leon Norris
Jedi Master Film Handler

Posts: 958
From: Elkins Park, PA, USA
Registered: Jun 2012


 - posted February 16, 2019 05:28 PM      Profile for Leon Norris   Email Leon Norris   Send New Private Message       Edit/Delete Post 
Paul, I checked to see if I had any motor brushes for the main motor. I only have one pair left! So those I will keep! If your motor gos then you will have to use the brushless motor! Or unless you can find some motor brushes!

 |  IP: Logged

Thomas Knappstein
Expert Film Handler

Posts: 124
From: Erwitte, Germany
Registered: Oct 2017


 - posted February 20, 2019 10:25 PM      Profile for Thomas Knappstein   Email Thomas Knappstein   Send New Private Message       Edit/Delete Post 
In the Past I bought wo old GS 1200 wich are defective and Worn out. And they have no Main Motor. So I got them very cheap.
To bring them back to Live I need an alterate Main Motor.
Here Is what I´ve done.

 -

 |  IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007


 - posted February 21, 2019 04:56 AM      Profile for Maurice Leakey   Email Maurice Leakey   Send New Private Message       Edit/Delete Post 
It is possible that many owners do not know what carbon brushes look like.
Click below to see a sample pair. I would point out that these are not for a GS-1200 !!!
https://www.amazon.co.uk/SODIAL-Electric-Replacement-Carbon-Brushes-black/dp/B00E34M6QK/ref=pd_lpo_vtph_60­_­t­r­_­t­_­2­?­_­e­n­c­o­d­i­n­g­=­U­T­F­8­&­a­m­p­;­p­s­c­=­1­&­a­m­p­; ­r­e­f­R­I­D­=­B­9­W­7­S­D391D89D33R45D1
The springs keep the brushes in contact as they slowly wear away. When they get worn nearly as far as the spring contacts it's time for replacements.

--------------------
Maurice

 |  IP: Logged

Leon Norris
Jedi Master Film Handler

Posts: 958
From: Elkins Park, PA, USA
Registered: Jun 2012


 - posted February 21, 2019 10:38 AM      Profile for Leon Norris   Email Leon Norris   Send New Private Message       Edit/Delete Post 
I like the brushless motor better! I think it last a lot longer! These motors were in the newer models! Elmo modified them for longer life! I don't think you can get the brushes any more! As for me I only have one pair left! So those with the brush motors keep an eye on it!

 |  IP: Logged

Thomas Knappstein
Expert Film Handler

Posts: 124
From: Erwitte, Germany
Registered: Oct 2017


 - posted February 21, 2019 11:34 AM      Profile for Thomas Knappstein   Email Thomas Knappstein   Send New Private Message       Edit/Delete Post 
I have never seen a brushles Motor in a GS 1200.
Can you show a Picture of this one please.

 |  IP: Logged

Leon Norris
Jedi Master Film Handler

Posts: 958
From: Elkins Park, PA, USA
Registered: Jun 2012


 - posted February 21, 2019 12:02 PM      Profile for Leon Norris   Email Leon Norris   Send New Private Message       Edit/Delete Post 
The GS1200 motor brushless looks just like the one with the brushes. It just does not have the top and bottom black caps on it! Most motors that I replaced are the original ones and these machines are over 40 years old! So that's pretty good!

 |  IP: Logged

Thomas Knappstein
Expert Film Handler

Posts: 124
From: Erwitte, Germany
Registered: Oct 2017


 - posted February 21, 2019 11:04 PM      Profile for Thomas Knappstein   Email Thomas Knappstein   Send New Private Message       Edit/Delete Post 
OK Now I understand what you mean.
I have one of this Motors too. The Brushes are inside on this Motor. You must open it to change them.

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2