8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Bell & Howell Lumina MX33 - NEED three black plastic cone-shaped drive tires

 - UBBFriend: Email this page to someone!    
Author Topic: Bell & Howell Lumina MX33 - NEED three black plastic cone-shaped drive tires
Norman Hixenbaugh
Junior
Posts: 24
From: Tulsa, OK
Registered: Apr 2009


 - posted June 06, 2019 02:52 AM      Profile for Norman Hixenbaugh   Email Norman Hixenbaugh   Send New Private Message       Edit/Delete Post 
I need the three black plastic cone-shaped drive tires that spin the rubber-lined disc mechanism that makes the projector reel turn. The black cone cap itself seems to disintegrate over time, leaving the stub of the drive tire intact. If anyone has just the cone caps, that is fine. I could probably apply them with contact cement. Intact conical tires are also fine if you have them.

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2