8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Missing Eumig S824 std 8mm small sprocket (front) part

 - UBBFriend: Email this page to someone!    
Author Topic: Missing Eumig S824 std 8mm small sprocket (front) part
Tim Murray
Junior
Posts: 29
From: Croydon, England
Registered: Nov 2014


 - posted June 08, 2019 08:27 AM      Profile for Tim Murray     Send New Private Message       Edit/Delete Post 
Hi I have a eumig s824 which is missing the front std 8mm sprocket (small). This is normally a permanent part of the projector. I have found a broken down S802D which has the same sprocket arrangement as the s824. Does anyone know how best to remove the std 8mm small permanent sprocket and then fit it to an s824? Thanks Tim

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2