8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Bad noise from my GS1200. What can be the cause?

 - UBBFriend: Email this page to someone!    
Author Topic: Bad noise from my GS1200. What can be the cause?
Matthieu van der Sluis
Master Film Handler

Posts: 373
From: Barendrecht, The Netherlands
Registered: Aug 2017


 - posted November 19, 2019 03:56 AM      Profile for Matthieu van der Sluis   Author's Homepage     Send New Private Message       Edit/Delete Post 
My Elmo GS1200 is making this noise when I turn the sound On.
https://drive.google.com/file/d/1cdIfr6tnSQX7ui-BhD2f5eWPxxtrPjr5/view?usp=sharing

Maybe it's coïnsidetial, but I think it started after I use Filmguerd in a very wet manor.
Lateron I learned to use only a small amound and dry it afterwards.
Is this possible, or do you recognize this as a defect of another manor?
Or do I need to clean trhe Soundheads really good.
I already tried to use alcohol tissues for this, but that did not help.

Or do I go to van Eck for a repair?

 |  IP: Logged

Steve Klare
Film Guy

Posts: 7016
From: Long Island, NY, USA
Registered: Jun 2003


 - posted November 19, 2019 05:05 AM      Profile for Steve Klare   Email Steve Klare   Send New Private Message       Edit/Delete Post 
It’s always good to start by working all the audio switches and plugging/unplugging the jacks about 10 times each.

Maybe it will fix it, maybe it won’t, but it costs nothing to try it.

(It’s probably not your heads)

--------------------
All I ask is a wide screen and a projector to light her by...

 |  IP: Logged

Stuart Hilliker
Film Handler

Posts: 79
From: London
Registered: Dec 2006


 - posted November 19, 2019 06:21 AM      Profile for Stuart Hilliker     Send New Private Message       Edit/Delete Post 
It’s worth trying the record switch trick. With no film threaded and the projector running, press the rear record enable button and repeatedly press the record switches. This should help to remove any dirt and oxidation from the contacts. It can take a few goes but usually helps.

 |  IP: Logged

Steve Klare
Film Guy

Posts: 7016
From: Long Island, NY, USA
Registered: Jun 2003


 - posted November 19, 2019 08:09 AM      Profile for Steve Klare   Email Steve Klare   Send New Private Message       Edit/Delete Post 
The record key maneuver also works with the machine off and unplugged, and without all the racket through the speakers you won't scare the cat!

Quite often I do it before anything else, just as maintenance.

--------------------
All I ask is a wide screen and a projector to light her by...

 |  IP: Logged

Paul Adsett
Film God

Posts: 5003
From: USA
Registered: Jun 2003


 - posted November 19, 2019 09:41 AM      Profile for Paul Adsett     Send New Private Message       Edit/Delete Post 
I've never heard a sound like that before from my own GS1200'S.
It's obviously not a mechanical issue. Sounds almost like feedback in the amplifier. Definitely take Steve's advice and manipulate the switches. Failing that, remove the amplifier module( easy to do- see GS1200 manual on this web site) and clean and spray the mono/stereo and optical/magnetic slide switches with contact cleaner/lubricant. Also clean and spray the interface contacts between the amplifier module and the main control board. All these contacts can give major noise problems if they are not perfectly clean and free of corrosion.

--------------------
The best of all worlds- 8mm, super 8mm, 9.5mm, and HD Digital Projection,
Elmo GS1200 f1.0 2-blade
Eumig S938 Stereo f1.0 Ektar
Panasonic PT-AE4000U digital pj

 |  IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007


 - posted November 19, 2019 10:39 AM      Profile for Maurice Leakey   Email Maurice Leakey   Send New Private Message       Edit/Delete Post 
Probably dry joints somewhere in the amplifier, or dirty switch contacts as mentioned.

--------------------
Maurice

 |  IP: Logged

Matthieu van der Sluis
Master Film Handler

Posts: 373
From: Barendrecht, The Netherlands
Registered: Aug 2017


 - posted November 20, 2019 07:03 AM      Profile for Matthieu van der Sluis   Author's Homepage     Send New Private Message       Edit/Delete Post 
I'm going to try this all out and let you know if it worked.

 |  IP: Logged

Mathew James
Jedi Master Film Handler

Posts: 740
From: Hamilton, Ontario, Canada
Registered: Dec 2014


 - posted November 20, 2019 08:08 AM      Profile for Mathew James   Email Mathew James   Send New Private Message       Edit/Delete Post 
I agree that this must be a bad switch or contact....

However, it also sounds like you were watching star wars last, and a piece of film of the 'wookie' scene is stuck in the sound path [Smile] [Smile]
This should be called 'Wookie Warble' [Big Grin]
Hope you can fix it soon!

Wookie Warble!!!

--------------------
--
Cheers,
Matt 📽

 |  IP: Logged

Steve Klare
Film Guy

Posts: 7016
From: Long Island, NY, USA
Registered: Jun 2003


 - posted November 20, 2019 08:33 AM      Profile for Steve Klare   Email Steve Klare   Send New Private Message       Edit/Delete Post 
I have an Elmo machine that had been forgotten in the box brand new. When I (carefully) powered it up 40-ish years later it broke into an oscillation like this when I turned the volume up.

I guessed it was because the electrolytic capacitors had sat dead so long they weren't formed up anymore. I let it sit powered up for a whole day and every time I walked past it, I had to turn the volume up higher for it to make the sound. By the end of the day it was fine all the way up to full throttle and it still is.

This GS may (or may not) have the equal but opposite problem, the caps have so many hours they are drying out.

-still the same: we hope the switch trick works, no need to rebuild the engine when a new battery would fix it!

--------------------
All I ask is a wide screen and a projector to light her by...

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2