Posts: 791
From: Northridge, CA USA
Registered: Jun 2003
posted June 28, 2009 07:27 PM
I'll take a picture of one tomorrow and post it. It's a round knob like a tv channel knob (remember those?) with a "D" 1/4 or 6mm shaft. It's probably the same as the 700 series but I have a projector missing one.
Posts: 1535
From: Long Beach, CA USA
Registered: Dec 2008
posted June 30, 2009 02:55 PM
Ah yes Pawel...I think my reg 8 plate is actually from a 700 series, as it will fit into the back part of the 800 but it looks like it has a slightly different cutaway for the claw.....I can send it to you if you want but it may not work...I would run a throwaway film first...
-------------------- "You're too Far Out Miss Lawrence"
Posts: 791
From: Northridge, CA USA
Registered: Jun 2003
posted June 30, 2009 03:00 PM
Kev,
I think the knob is the same, but it's hard to say since I've seen several variations on ebay of Emuig 800 series. But I'd say it would fit. Send me an email and we'll arrange payment.
posted July 02, 2009 04:16 PM
dino send me an email ( lygi at lygi dot pl ) i will send You super8 aperture plate photos and you will compare ok ? i heard somewhere that 700 and 800 series has the same plates....