8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm equipment for sale/trade   » Elmo ST 1200 part needed..

 - UBBFriend: Email this page to someone!    
Author Topic: Elmo ST 1200 part needed..
John Capazzo
Master Film Handler

Posts: 421
From: Hillside, NJ USA
Registered: Jan 2004


 - posted February 11, 2010 07:52 PM      Profile for John Capazzo     Send New Private Message       Edit/Delete Post 
Would anyone have the tension spring for an Elmo ST 1200? This is for the original ST 1200 machine (greenish) and it needs the spring that belongs near the top (when rear cover is removed) that keeps tension when changing 24/18. Without the spring, it won't rewind and engange properly. I also need the lamp setting knob. It's a cosmetic piece that smilply slips on the metal lamp switch when setting from off to 100-150 W. Thanks for any searches/help.--John

--------------------
"the image is about 30 feet ahead of us."

 |  IP: Logged

Robert Oakley
Film Handler

Posts: 46
From: Binghamton, NY
Registered: Dec 2003


 - posted February 13, 2010 05:14 PM      Profile for Robert Oakley   Email Robert Oakley   Send New Private Message       Edit/Delete Post 
Can you send me a photograph, I got a ST 1200 parts machine.

 |  IP: Logged

Gian Luca Mario Loncrini
Phenomenal Film Handler

Posts: 1948
From: Verona (Italy)
Registered: Jan 2009


 - posted February 14, 2010 02:31 PM      Profile for Gian Luca Mario Loncrini   Author's Homepage   Email Gian Luca Mario Loncrini   Send New Private Message       Edit/Delete Post 
John, contact also Mr Petrin, in case:

luigi.super8cine (at)fastwebnet (dot) it

Good luck.

--------------------
I remember when I was (super) 8 years old...

 |  IP: Logged

John Capazzo
Master Film Handler

Posts: 421
From: Hillside, NJ USA
Registered: Jan 2004


 - posted February 15, 2010 05:15 PM      Profile for John Capazzo     Send New Private Message       Edit/Delete Post 
Robert, are you willing to sell the entire machine as is? Thanks--John

--------------------
"the image is about 30 feet ahead of us."

 |  IP: Logged

Robert Oakley
Film Handler

Posts: 46
From: Binghamton, NY
Registered: Dec 2003


 - posted February 17, 2010 10:21 PM      Profile for Robert Oakley   Email Robert Oakley   Send New Private Message       Edit/Delete Post 
Yes I can sell it - Email me and we'll discuss it.

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2