8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 16mm Forum   » Eiki 16mm loudspeaker splitter

 - UBBFriend: Email this page to someone!    
Author Topic: Eiki 16mm loudspeaker splitter
Fabrizio Mosca
Master Film Handler

Posts: 346
From: Milano, Italy
Registered: Jan 2004


 - posted June 04, 2017 05:51 AM      Profile for Fabrizio Mosca   Email Fabrizio Mosca   Send New Private Message       Edit/Delete Post 
Hi All,
I came accross a new Eiki 16mm loudspeaker splitter (don't know if it's its real name), but I got no specs on it and found nothing on the net.
Does any of you know how it works in terms of Ohms of the two speakers?
Should I consider the usual rule for resistance of objects connected in parallel?

Here's a picture:
 -

Thanks!

 |  IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007


 - posted June 04, 2017 06:07 AM      Profile for Maurice Leakey   Email Maurice Leakey   Send New Private Message       Edit/Delete Post 
Fabrizio
Why not open it and check the wiring. The plug certainly looks like those used with Eiki speaker leads.

--------------------
Maurice

 |  IP: Logged

Fabrizio Mosca
Master Film Handler

Posts: 346
From: Milano, Italy
Registered: Jan 2004


 - posted June 04, 2017 06:28 AM      Profile for Fabrizio Mosca   Email Fabrizio Mosca   Send New Private Message       Edit/Delete Post 
Hi Maurice,
I've done, but there are some components I'm not able to recognize (see pic)
 -

Consider that it's an origial Eiki piece. Apart from the cable and marked Eiki plug, it came from a technician who repaired projectors (he mainly had xenon spare parts)

 |  IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007


 - posted June 04, 2017 10:02 AM      Profile for Maurice Leakey   Email Maurice Leakey   Send New Private Message       Edit/Delete Post 
Fabrizio

Looking at one of my Eiki/Elf projectors I see that the two speakers in its side cover are each 16 ohms. They are wired in parallel thus giving a total impedance of 8 ohms at the projector's speaker output socket. This is confirmed by the tag alongside the socket marked "SPEAKER 8 OHMS".

In the box illustrated the two jack sockets certainly look as if they are wired in parallel.

I suspect that the two unknown components provide some form of impedance matching to allow two standard Eiki/Elf side cover speakers to be connected for extra sound output.

Referring to the manual for a SNT/ENT there is no mention of this accessory, only "25 watt RMS into 8 ohm load".

Perhaps another member will know the correct details about this accessory.

--------------------
Maurice

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2