8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 16mm Forum   » Bell & Howell Filmosound 535 Lubricant & Oil?

- UBBFriend: Email this page to someone!    
Author Topic: Bell & Howell Filmosound 535 Lubricant & Oil?
Owen McCafferty
Junior
Posts: 1
From: Cleveland, OH, USA
Registered: Aug 2017

- posted August 02, 2017 09:47 AM      Profile for Owen McCafferty   Email Owen McCafferty   Send New Private Message       Edit/Delete Post 
Hi All,

I'm going to be replacing the worm gear in my Bell & Howell Filmosound 535 and from what I've been reading, part of the problem the worm gears failed was the lube the factory applied to it. I want to clean it all off the other gears too, but what should I replace it with? Also, what kind of oil should I use for other parts?

Thanks!
Owen

 |  IP: Logged


All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
- Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2