8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 16mm Forum   » Projector start up speed/running issue. Any advice.

 - UBBFriend: Email this page to someone!    
Author Topic: Projector start up speed/running issue. Any advice.
Can Sanalan
Expert Film Handler

Posts: 130
From: London, United Kingdom
Registered: Jul 2017


 - posted November 20, 2017 03:18 AM      Profile for Can Sanalan     Send New Private Message       Edit/Delete Post 
Hello,

Only recently my Elf RT1 has begun to start up slow and then pick up speed and run at normal speed.
I'm not sure if it's the take up spool belt, its cork or something else in the machine that's giving up.
It lasts for around 5-8 secs after the motor is switched on and then it's fine.
But interestingly this doesn't happen everytime I set up the projector. Only on some some occasions and so I'm baffled as to what it could be.

Has anyone come across this type of thing before?

Thank you,

 |  IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007


 - posted November 20, 2017 09:42 AM      Profile for Maurice Leakey   Email Maurice Leakey   Send New Private Message       Edit/Delete Post 
Can
The RT1 is a very old model now. When was it last serviced and lubricated?

--------------------
Maurice

 |  IP: Logged

Can Sanalan
Expert Film Handler

Posts: 130
From: London, United Kingdom
Registered: Jul 2017


 - posted November 20, 2017 11:54 AM      Profile for Can Sanalan     Send New Private Message       Edit/Delete Post 
Hi Maurice,

I bought it off ebay back in June.
In answer to your question I haven't had it serviced yet.

The slow start up has only happened recently.

The previous owner said it was handed to him by his boss who only used it once or twice and he himself never used it cause he didn't have any 16mm films and it's something he wasn't into hence the sale.
He dropped off the projector in person which was kind of him.

He said he had replaced all the belts with new ones.

The project runs fine once its up and running.
The only other issue I have with it is the crackling volume pot.
I'll have to take it apart and spray into the pot from what I've read.
I've tried turning the volume knob back and forth over and over as someone suggested but that hasn't really helped.

 |  IP: Logged

Jose Artiles
Master Film Handler

Posts: 357
From: Spain
Registered: Oct 2005


 - posted November 24, 2017 01:56 PM      Profile for Jose Artiles   Email Jose Artiles   Send New Private Message       Edit/Delete Post 
Can,it happen the same to me a few weeks ago,the problemas was a streched motor belt,try to change the motor belt for a new one and im sure the trouble will be solved

--------------------
As Steven Spielberg says....
Nothing beats old school projection. Digital is just an imitation.

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2