8mm Forum


Post New Topic  Post A Reply
my profile | my password | register | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 16mm Forum   » Eiki RM1

 - UBBFriend: Email this page to someone!    
Author Topic: Eiki RM1
Marco Pellis
Junior
Posts: 2
From: Cape Town, South Africa
Registered: Jun 2018


 - posted February 05, 2019 05:37 AM      Profile for Marco Pellis   Email Marco Pellis   Send New Private Message       Edit/Delete Post 
Any one know the ins and outs on the RM1 take up drum with the cork liner set up and setting of the drum its the model with the external chrome drum and the set screw and spring on the bracket any information would be most helpfully with many thanks Marco cape town RSA

 |  IP: Logged

Phil Clarke
Junior
Posts: 24
From: London, United Kingdom
Registered: May 2014


 - posted February 07, 2019 04:01 AM      Profile for Phil Clarke   Email Phil Clarke   Send New Private Message       Edit/Delete Post 
Yes I may be able to help
Can you supply a pic of the parts you're describing
ta
phil

 |  IP: Logged

Maurice Leakey
Film God

Posts: 5737
From: Bristol. United Kingdom
Registered: Oct 2007


 - posted February 08, 2019 04:42 PM      Profile for Maurice Leakey   Email Maurice Leakey   Send New Private Message       Edit/Delete Post 
Marco
Click on the below, and then scroll down to "Eiki RST/RT/RM operator and service manuals". Then click.
The first part is the operator's manual, the second part is the service manual. In the latter you will find details to assist with your query.
http://www.film-tech.com/warehouse/index.php?category=2#16mm Projectors

--------------------
Maurice

 |  IP: Logged

Marco Pellis
Junior
Posts: 2
From: Cape Town, South Africa
Registered: Jun 2018


 - posted February 08, 2019 11:01 PM      Profile for Marco Pellis   Email Marco Pellis   Send New Private Message       Edit/Delete Post 
Hi Maurice many thanks for the feed back i went to the link and found what i think i needed to help, Wow wealth of information and manuals there, I actually was able to fiddle and got it to operate ,prior to reading the Tec manual but all the same a good bit of information on the set up with many thanks M will Post a pic of the refurbished RM1

 |  IP: Logged



All times are Central  
Post New Topic  Post A Reply Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2