8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 16mm Forum   » Bauer P7 or P8 projectors.

 - UBBFriend: Email this page to someone!    
Author Topic: Bauer P7 or P8 projectors.
Paul Barker
Master Film Handler

Posts: 395
From: Lancashire, England
Registered: Jun 2014


 - posted August 15, 2019 02:42 PM      Profile for Paul Barker   Email Paul Barker   Send New Private Message       Edit/Delete Post 
i would like views/reviews from owners of this make of 16mm projector please. worth a buy?

 |  IP: Logged

Mark Todd
Film God

Posts: 3846
From: UK
Registered: Aug 2003


 - posted August 16, 2019 05:20 PM      Profile for Mark Todd     Send New Private Message       Edit/Delete Post 
Hi Paul, well most have 3 or 4 claws and handle film very well.

But changing the belt can be a going on I hear.

You need to run/hear/see/check one in person really as they vary wildly from very quiet and nice to loud as heck and grim, they can also scratch as well sometimes.

Some also run like clock work some very far from that noise asside.

But fantastic picture and rock steady etc.

P7`s have a brushless motor and P8`s an electronic one.( brushed ).

Plastic gate on the forward/lens side.

Very fast rewind if working OK, sometimes a bit too fast and severe maybe even.

If you can pick up a nice one cheap enough very well worth a punt.

Take the same lens as an eiki but focusing is far far better and finer/sharper etc wth a holder/sleeve that moves backwards and forwards if you will with the 42.5mm lens in it.

A little used and quiet P8 is often the best bet and some were made quite late on too.

Best Mark.

 |  IP: Logged

Paul Barker
Master Film Handler

Posts: 395
From: Lancashire, England
Registered: Jun 2014


 - posted August 17, 2019 01:56 AM      Profile for Paul Barker   Email Paul Barker   Send New Private Message       Edit/Delete Post 
thank you Mark for your assistance. very helpful. Paul.

 |  IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007


 - posted August 17, 2019 02:10 AM      Profile for Maurice Leakey   Email Maurice Leakey   Send New Private Message       Edit/Delete Post 
When Rank's 25 year contract with Bell & Howell terminated they turned to Bauer for their supplies and the result is the Rank Aldis.
I have two, a early three claw model with the small A1/233 lamp, and a later model which uses the A1/259, this model has four claws and also a still function.
The lamp has two settings, the lower setting is quite OK for home use and it means that the lamps have quite a long life.
The projectors are very quiet in operation.
https://www.youtube.com/watch?v=yzxBceTV_bU

[ August 17, 2019, 03:23 AM: Message edited by: Maurice Leakey ]

--------------------
Maurice

 |  IP: Logged

Paul Barker
Master Film Handler

Posts: 395
From: Lancashire, England
Registered: Jun 2014


 - posted August 17, 2019 05:22 AM      Profile for Paul Barker   Email Paul Barker   Send New Private Message       Edit/Delete Post 
thank you Maurice. most helpful...

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2