8mm Forum: Leads to connect sound projector to audio.

»	8mm Forum » General Yak » Leads to connect sound projector to audio.

UBBFriend: Email this page to someone!

Author

Topic: Leads to connect sound projector to audio.

Al Wilkie
Junior
Posts: 18
From: Gloucester, UK
Registered: Feb 2015

posted March 09, 2018 02:03 PM

I want to take sound off on a Noris 342 stereo sound projector & record it on my recorder that has 3.5 stereo jack socket (much the same as most computers etc).

Would a 7 pin din to 3.5 stereo like this one do the trick, or is the Noris 342 wired differently?

https://www.amazon.co.uk/dp/B06XPDRJMG?ref_= pfb_ff90dn4g9c7ii97am8el7lcncm6g&tag=hydfbook-21&ascsubtag=pfb-P01-V01-O5-T1-HI-QOC1YI

| IP: Logged

Brian Fretwell
Phenomenal Film Handler

Posts: 1785
From: London, UK
Registered: Jun 2014

posted March 09, 2018 02:14 PM

Not sure about the Noris, but not many DIM sockets for audio had 7 pins, most were 5 pin. Left and right for both in and out can't remember what the middle pin was for. The ad says for a specific B&O system with 7 pins so it might not fit without removing a couple of them.

| IP: Logged

Steve Klare
Film Guy

Posts: 7016
From: Long Island, NY, USA
Registered: Jun 2003

posted March 09, 2018 02:21 PM

If there was only one unexplained pin it was probably chassis: return for all of them.

--------------------
All I ask is a wide screen and a projector to light her by...

| IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007

posted March 09, 2018 02:51 PM

Al
The Super 8 database says the output jack is a 5-pin DIN.
http://www.filmkorn.org/super8data/database/projectors_list/projectors_noris/noris_norisound_342.htm
This is the lead you need.
https://www.amazon.co.uk/kenable-3-5mm-Stereo-Audio-Cable/dp/B003OSNVC4

--------------------
Maurice

| IP: Logged

Al Wilkie
Junior
Posts: 18
From: Gloucester, UK
Registered: Feb 2015

posted March 09, 2018 04:57 PM

Thanks everyone for your help.

| IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007

posted March 10, 2018 02:09 AM

It's probable that a screened cable is used, if so, the screen is connected to the centre pin (no.2).

--------------------
Maurice

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2