This is topic Sprocket wanted in forum 9.5mm for sale/trade/wanted at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=10;t=000081

---

Posted by Martin Jones (Member # 1163) on September 09, 2014, 05:49 AM:
 
I'm looking for 9.5mm sprockets with 16 teeth in good condition. Have you anything that meets this requirement?
Either with or without a`spindle: please state bore if without, or spindle diameter and free length if with.
Martin
 

---

Posted by Richard C Patchett (Member # 974) on September 09, 2014, 09:56 AM:
 
Greetings Martin
A little confusing
Do you need both
16mm and a 9.5 ?
RC
 

---

Posted by Martin Jones (Member # 1163) on September 09, 2014, 11:04 AM:
 
Yes.... 9.5 and 16 and Reg 8 and Super 8.... all 16 tooth.
 

---

Posted by Terry Sills (Member # 3309) on September 11, 2014, 01:05 PM:
 
Martin
I think everyone would like to know what your project is! Sounds intriguing. Why don't you enlighten us?
 

---

Posted by Dominique De Bast (Member # 3798) on September 13, 2014, 02:18 PM:
 
I am, indeed, curious, too.
 

---

Posted by Ken Finch (Member # 2768) on October 04, 2014, 09:31 AM:
 
Are'nt we all!! Ken Finch.
 

---

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC


UBB.classic^TM 6.3.1.2