This is topic "Wizard of Oz" blues in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
http://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=000054

Posted by Paul Suchy (Member # 80) on July 19, 2003, 05:35 PM:
 
I have a Derran print of THE WIZARD OF OZ, and although the print quality is excellent, the black and white portion has a definite blue tint to it; I know this is due to the problem of using color stock for B&W. Are the Ken film prints done with B&W stock? I could probably correct my print a little by using a filter, but that's just another thing to fiddle with while showing a film. My Derran print is recent-are the older prints any better?
 
Posted by Mike Peckham (Member # 16) on July 20, 2003, 03:02 AM:
 
My copy of Wizard... has the B&W section on B&W stock, there is a definate splice where it changes to colour. I always assumed that it was a Derann print but maybe not. I'd be interested to know if it is in fact a Ken print because the colour has held up very well, much better than the Ken prints in my collection.

Mike.
 
Posted by Kevin Faulkner (Member # 6) on July 20, 2003, 07:45 AM:
 
Found many Derann releases on the Agfa Poly stock have this blue look. [Frown] I have a copy of The Dambusters which is printed on Agfa stock and its dead neutral. [Smile] Hope it stays that way.

Kevin
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2