This is topic GS-1200 Xenon lamp voltage / current in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
http://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=000068

Posted by Steven Sigel (Member # 21) on July 29, 2003, 09:50 AM:
 
Does anyone know the exact voltage and current used by the
GS-1200 Xenon lamp? I've sent a lamp (which Ian O'Reilly kindly provided) to the lamp company for cloning and they are having trouble getting it to strike -- they asked me to find the lamp voltage and current. I couldn't find this information in the manual. If anyone knows, please let me know either here or by email (sts@sigel.net).
 
Posted by Kevin Faulkner (Member # 6) on July 29, 2003, 10:48 AM:
 
Hi Steve,
I have never to this day seen a service manual for the xenon version which would have had this info. I think that a supplemental addition to the regular manual was probably supplied
only to Elmo qualified service personnel especially due to the voltage risks.
Why dont you contact Elmo Japan. They have been helpful to me in the past.
let us know what you find out.

Kevin
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2