This is topic Eumig Din Plugs for recording.. in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=000929

Posted by Alan Rik (Member # 73) on December 03, 2004, 05:58 PM:
 
Hi Guys,
I just sold a Eumig S926 to one of our members Bob and he wanted to know where he could get the DIN plugs for connecting the Projector to an audio source for rerecording. Any ideas?
 
Posted by Jean-Marc Toussaint (Member # 270) on December 04, 2004, 04:29 AM:
 
Alan,
Any good electronic store should carry that. You might at least try RadioShack, (although most of the times, the sales persons aren't particularly expert on details like these). But they do have a whole section of connectors, plugs, sockets, bits and pieces for audio where you might find what you need to build the cord yourself.
 
Posted by Paul Adsett (Member # 25) on December 04, 2004, 07:18 AM:
 
The 5 pin DIN input connector for the Eumig 900 series needs to be wired as follows:

Microphone: Pins 1 and 2 (mono)
Pins 1,4 and 2 (stereo)

Phono: Pins 3 and 2 (mono)
Pins 3,5 and 2 (stereo)
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2