This is topic SURPRISE. Elmo rubbers in stock NOW in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
http://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=001839

Posted by Tom Photiou (Member # 130) on April 13, 2006, 12:05 PM:
 
My engineers have surprised me and come up trumps.
I now have in stock 25 pairs of the Elmo 1200D/HD Rubber wheels.
Obviously one pair = 1 x 24fps rubber wheel and 1 x 18fps rubber wheel.
The price is £14 per pair + £2.00(recorded)P+P.
The quality is excellent, not a flaw on any suface.
All those interested please e-mail me at tphotiou(at)blueyonder(dot)co(dot)uk.
Please spread the word. I am very pleased with this result. Many thanks in advance to all those interested. [Wink] [Razz]

 -

[ April 14, 2006, 03:11 AM: Message edited by: Tom Photiou ]
 
Posted by Mike Peckham (Member # 16) on April 13, 2006, 12:08 PM:
 
Tom

Well done, another happy ending [Big Grin] !

Mike

ps. I don't have an ST 1200 but if you have any rubbers left once the guys who do have them have had theirs, then I will probably buy a pair 'just in case' [Wink] .
 
Posted by Tom Photiou (Member # 130) on April 13, 2006, 12:13 PM:
 
I will bere that in mind, thanks Mike, i trust your enjoying yourself and have seen many amazing sites. Hopefully my Brother and i will be at Ealing in October. Be good to see you there if you make it. [Wink]
 
Posted by Tom Photiou (Member # 130) on April 13, 2006, 12:15 PM:
 
I will bere that in mind, thanks Mike, i trust your enjoying yourself and have seen many amazing sites. Hopefully my Brother and i will be at Ealing in October. Be good to see you there if you make it. [Wink]
 
Posted by Mike Peckham (Member # 16) on April 13, 2006, 12:28 PM:
 
Tom

See you there [Wink] .

Mike
 
Posted by Tony Milman (Member # 7) on April 13, 2006, 01:41 PM:
 
Tom

Put me down for a set. I did chuckle at the title to your thread. Had me wondering if I needed to use a "protective" for safe cine with my elmo [Big Grin]
 
Posted by Tom Photiou (Member # 130) on April 13, 2006, 02:13 PM:
 
[Big Grin] Thanks Tony, a pair is reserved for you.
Funny thing is the engineers told me around 2-4 weeks, the next day they were delivered to my door by the big chief himself. [Wink]
 
Posted by Stuart Mercer Thorburn (Member # 574) on April 13, 2006, 04:24 PM:
 
Hi tom

Can you PM me with your addy and I'll have a pair as well. Another decade out of the old girl yeehaa

Cheers [Big Grin]
 
Posted by Tassos Laudas (Member # 588) on April 13, 2006, 04:25 PM:
 
Tom a pair for me please as well! Just let me know about how to get it-paypal account or bank account info,etc.
Thank you
 
Posted by Jan Bister (Member # 332) on April 13, 2006, 10:39 PM:
 
Yes... I'm all for playing it safe... Put me down for two rubbers, please [Big Grin]
 
Posted by Tom Photiou (Member # 130) on April 14, 2006, 02:37 AM:
 
Thanks boys, Stuart, ive sent a Pm and thank you to Jan as well, no problem.
We'l keep these 1200's going for another generation. [Wink]
 
Posted by Tom Photiou (Member # 130) on April 25, 2006, 12:27 PM:
 
Just thought id let you know that uncle Barry Johnson has sent me a very nice mail ref these rollers. He has recieved his and hopefully can confirm the job as top notch in accuracy and quality. [Razz]
 
Posted by Jean-Marc Toussaint (Member # 270) on June 27, 2006, 11:51 AM:
 
Tom, I've sent you an email. Did you get it?
I'd like 4 sets, please...
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2