This is topic Sankyo Sound 700 question in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
http://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=005246

Posted by Barry Fritz (Member # 1865) on January 29, 2010, 06:44 PM:
 
I just got a NIB Sankyo Sound 700. I didn't need it as I have two Sankyo Dualux 2000H that are like new. However, the deal I got on it was to good to pass up. The manual says: "Your new projector can project Super-8 (or Single-8)magnetic sound film (talkies)." Question: Can it play non-sound Super 8 film? I don't want to experiment and risk running some film or the projector. I know I'll get the answer here. Thanks in advance.
 
Posted by Douglas Meltzer (Member # 28) on January 29, 2010, 10:37 PM:
 
Barry,

All Super 8mm (and Standard 8mm) sound projectors can also project silent films of the same gauge. Sound Super 8mm film is the same as it's silent counterpart, just a bit thicker because of the addition of the main and balance sound stripes. A few sound projectors have a switch/setting for silent films that keeps the sound head from coming into contact with the film, thus saving wear on the head. I know the settings on the Sankyo Stereo 800 operation contol switch are (going clockwise): Stop, Motor Forward, Silent Projection, Sound Projection.

Doug
 
Posted by Barry Fritz (Member # 1865) on January 30, 2010, 08:17 AM:
 
Aha! Looking at mine, it is the same. Thanks Doug.
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2010 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2