This is topic How on Earth...Eumig 610 in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=005386

Posted by Jon Addams (Member # 816) on April 03, 2010, 02:43 PM:
 
How on earth can you change the motor belt on an Eumig 610D without taking the whole machine apart?

Thanks

Jon
 
Posted by Douglas Meltzer (Member # 28) on April 03, 2010, 04:03 PM:
 
Jon,

According to the manual:

 -

Doug
 
Posted by Jon Addams (Member # 816) on April 03, 2010, 09:45 PM:
 
Hello Doug,

I didn't have the manual.

Thank you for the drawing and instructions. Looking at the drawing and reading the instructions it appears simpler than putting one foot in front of the other when walking. However, in actuality it’s a heck of a chore, it’s almost impossible to get the belt in place as there’s literally no space to feed it at the top.

I changed the belt all right but I still think it may have been easier by taking the machine apart. [Big Grin] [Big Grin] WOW!!!

Thanks again,

Jon
 
Posted by Douglas Meltzer (Member # 28) on April 03, 2010, 10:11 PM:
 
Jon,

Sorry it was so tough, but I'm glad it worked out. I've e-mailed you the manual.

Doug
 
Posted by Jon Addams (Member # 816) on April 04, 2010, 12:10 AM:
 
Thanks for the manual Doug, it's one of the few I didn't have.

Regards,

Jon
 
Posted by Mikael Barnard (Member # 1637) on April 04, 2010, 07:00 PM:
 
This is the main reasons I HATE 610Ds, that belt is such a PIG to change!
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2