This is topic Are the belts for Sankyo 600 and 700 the same size? in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=005766

---

Posted by Paul Brandes (Member # 2046) on October 12, 2010, 08:03 PM:
 
Hi,

Could anyone please tell me if the belts for a Sankyo 700 will fit on a Sankyo 600 projector.
I was told that the 600 had a completely different set and just wanted to verify this. I would be grateful for any help with this.

Thank you

Regards

Paul
 

---

Posted by Barry Fritz (Member # 1865) on October 13, 2010, 02:13 PM:
 
PAUL: I'm not sure, but if you could email Mark, he may be able to tell you. He sells belts on Ebay for almost any projector you can imagine. His email is: projectorbelts@mchsi.com
 

---

Posted by Paul Brandes (Member # 2046) on October 13, 2010, 02:39 PM:
 
Hi Barry

Many thanks. I will email Mark

Regards

Paul
 

---

Posted by Maurizio Di Cintio (Member # 144) on October 14, 2010, 05:10 AM:
 
I suspect the 600 is different from the 700, too.
But FYI, on the more modern Sankyo's (eg 301, 401, 501, 700 & 800) a common O-ring of suitable diameter will do the job flawlessly at a much lower price.
 

---

Posted by Paul Brandes (Member # 2046) on October 14, 2010, 01:55 PM:
 
Hi Maurizio

Many thanks

Regards

Paul
 

---

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC


UBB.classic^TM 6.3.1.2