8mm Forum: Noris Splicomatic 8/16

This is topic Noris Splicomatic 8/16 in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=005962

Posted by Gary Groch (Member # 2408) on January 27, 2011, 12:31 AM:

Hi
Maybe it sound stupid but..
I'm looking for a manual (instruction how to splice) for Noris Splicomatic 8/16
Thanx

Posted by Jim Schrader (Member # 9) on January 28, 2011, 08:52 AM:

hello providing this looks like yours

flip up the lever that has 1 and the 2-3 together then place your film on the small prongs on the left side then bring down the 2 to cut the film, then put the 1 lever down while placing the film on the number 3 prongs on the right bring down the 3 lever that should cut the film on the right side.
the lever on top if its red like in the picture is your scraper while the film is in the left side (number 1) you run this back and forth to scrap the emulsion off the film just 2-3 times should be good clean the area with a small brush then apply film cement to the scraped area (the film should still be attached to the number 3 lever)then bring the 3 lever down and the film should lay on the cement area hold it for a few seconds then you have a cement splice.

While these may not be the clearest instructions maybe someone can offer more tips

Posted by Gary Groch (Member # 2408) on January 31, 2011, 01:10 AM:

Thanx a lot Jim.

UBB.classic^TM 6.3.1.2