This is topic WANTED: Part for Elmo ST-1200 (D or HD) in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=006551
Posted by Jon Addams (Member # 816) on October 17, 2011, 03:03 PM:
I have 3 Elmo ST-1200 HD with cracked number 2 rewind clutch. I’ll be happy to get them together or one at a time – If you have any, name your price.
Thank you,
Jon
Posted by Pasquale DAlessio (Member # 2052) on October 17, 2011, 03:04 PM:
Jon
Check with Dan Lail. He is a member here.
PatD
Posted by Winbert Hutahaean (Member # 58) on October 17, 2011, 03:33 PM:
quote:
I have 3 Elmo ST-1200 HD with cracked number 2 rewind clutch.
Jon, did you say that you have 3 machines with the same problem?.
If so, then it might be a common problem.
I will see my broken one and will see if I can supply you
Posted by Jon Addams (Member # 816) on October 17, 2011, 03:52 PM:
Hello Winbert,
It could be a common problem; I had these issues before on similar machines. Thank you for checking.
Jon
Hi Pat,
I don't think Dan has been visiting much since he started his Forum but I will contact him by email.
Thanks for the tip,
Jon
[ October 18, 2011, 12:03 AM: Message edited by: Jon Addams ]
Posted by Jon Addams (Member # 816) on October 21, 2011, 05:20 PM:
Anyone???
Posted by Winbert Hutahaean (Member # 58) on October 21, 2011, 05:34 PM:
Jon, it seems mine also has similar crack.
Posted by Pasquale DAlessio (Member # 2052) on October 21, 2011, 07:10 PM:
Jon-Winbert
Go to www.Mcmaster-Carr.com. They have all kinds of power transfer parts. I have purchased from them before and the prices aren't expensive. They sell gears , pulleys, rollers etc.
Pat
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2