This is topic Last releases on Kodak pre-striped? in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=006681

Posted by Adrian Winchester (Member # 248) on December 03, 2011, 08:12 AM:
 
I was trying to recall when Kodak pre-striped stock was discontinued and examples of the last new releases that were initially available on this, so if anyone can remind me, I'd be grateful. Although there are of course plenty of prints from after this time that have good sound, I expect most collectors would agree that you couldn't really beat Kodak's striping in terms of consistency and quality, although of course we didn't see the substantial amounts that they reportedly threw away due to it not meeting their quality control standards.
 
Posted by Ralf Hoff (Member # 36) on December 03, 2011, 09:14 AM:
 
Adrian,

I' ve a print of Deranns Romancing the Stone on Kodak pre-striped stock.

As far as I know the first prints of Star Wars are also released on this filmstock. A good friend of me was the owner of one of this prints.

Hope this helps you.

Ralf Hoff

Cine 8-16 - the magazine for film making and film collecting
http://www.celluloidfilm.de
 
Posted by Adrian Winchester (Member # 248) on December 03, 2011, 08:16 PM:
 
Thanks, Ralf. 'Star Wars' was released in 1989 and having had a look at issues of FFTC soon afterwards, I found references in the June 1990 issue to pre-striped stock being discontinued and Derann's striping equipment being installed. The previous issue featured a review of 'Aliens', which I knew I had on pre-striped stock, but I expect most the prints in circulation are not pre-striped.
 
Posted by John Clancy (Member # 49) on December 04, 2011, 05:10 AM:
 
Just as I was thinking I have a print of 'Aliens' on Kodak pre-stripe. Needless to say it has a perfect re-recording on that wonderful stripe.
 
Posted by Winbert Hutahaean (Member # 58) on December 04, 2011, 07:06 AM:
 
I don't quite understand heee. When you guys are talking pre-striped vs non pre- striped, is this only about sound quality or also picture/ print quality?
 
Posted by Adrian Winchester (Member # 248) on December 04, 2011, 09:51 PM:
 
I'm primarily talking about sound quality, or at least the potential for good sound. I'm certainly not saying that the sound after the end of pre-striped stock couldn't be very good, but there wasn't the same consistently perfect results, so I'm sure that in situations where a particular release exists on both types, nearly all collectors would opt for a pre-striped print, given the opportunity.

However, soon after the end of pre-striped, all Derann releases were printed on Agfa stock until the switch back to Kodak about 9-10 years ago, although it's debatable whether that had implications for print quality.
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2