This is topic bottom feet for sankyo 600 in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=007554
Posted by Jim Schrader (Member # 9) on October 22, 2012, 10:12 AM:
anybody parting out with a sankyo 600 or equivilant the bottom of mine is cracked it looks like this.
Posted by Terry Lagler (Member # 1110) on October 22, 2012, 02:02 PM:
Hi Jim
Found this in my supply of projector parts. Don't know if the screw mount configuration is correct. I Think this may have come from a Chinon though.
Yours for the price of shipping.
Cheers
Terry
Posted by Jim Schrader (Member # 9) on October 23, 2012, 10:04 AM:
I sent mine out to be fixed so I cannot check the screw pattern but it may work I will have to wait till it comes back mine only had 2 screws that held it on, thanks
Posted by Terry Lagler (Member # 1110) on October 23, 2012, 10:07 AM:
No problem, will be in my box o' stuff.
Cheers
Terry
Posted by Pasquale DAlessio (Member # 2052) on October 23, 2012, 10:51 AM:
Hi Terry
Would you have a take up spindle for my chinon 4100?
Thx
PatD
Posted by Terry Lagler (Member # 1110) on October 23, 2012, 02:16 PM:
Hi Pat
I don't think so, but let me take a rummage through and I'll get back to you.
Cheers
Terry
Posted by Pasquale DAlessio (Member # 2052) on October 23, 2012, 05:58 PM:
Terry
Thanks but I just found one.
PatD
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2