This is topic Bell & Howell 256 will not rewind with film in gate in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=009633

Posted by Phil Mitchell (Member # 3876) on December 17, 2014, 08:34 PM:
 
Hi all,
Happy Holidays.
My B & H 256 all of a sudden will not rewind if I have film threaded through its gate, well it tries to, but the manual winding is quicker, although hard on old fingers doing it manaually.
I know one rewinds film after one has ran film all to other reel from reel to reel (which unit does okay) and not through gate, but sometimes especially when film breaks, one wants to remind it back out.

I've looked inside the back and belt is fine, replaced that the other week, the cog wheels all seem to be okay and inline, you can see unit kick into reverse and then is struggles, motor goes into reverse mode okay.

Any suggestions what I could look for other than I have mentioned.

Thanks

Phil
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2