8mm Forum: Locating the fuse in a Sankyo 700

This is topic Locating the fuse in a Sankyo 700 in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=009691

Posted by Paul Brandes (Member # 2046) on January 10, 2015, 06:53 PM:

Hi,

I am trying to find the fuse in a Sankyo 700 projector I have. I bought a manual from Old Timer Cameras and it does mention a fuse, butI have not been able to locate it. I would be grateful if anyone on the forum could tell me where it would be.

Many thanks.

Posted by Steve Klare (Member # 12) on January 10, 2015, 08:35 PM:

The main fuse has to be the first stop after the power inlet, because if there is a short circuit to chassis between the inlet and the fuse the fuse won't blow and the whole show could go up in flames. If everything in the machine is after the fuse, everything is controlled by it.

So if you find where the power enters the machine and follow the black wire, it should take you right to the fuse.

Posted by Paul Brandes (Member # 2046) on January 12, 2015, 01:35 PM:

Hi Steve,

Many thanks. I thought the fuse was on one of the boards.So far I havent found it but will keep looking.

Regards

paul

UBB.classic^TM 6.3.1.2