8mm Forum: Elec. diagram for Eumig Mark S

This is topic Elec. diagram for Eumig Mark S in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=011428

Posted by Niels Peter Buch (Member # 3757) on April 21, 2017, 08:11 AM:

Dear film friends.
Im searching for a diagram or perhaps som know how
.
Which kind of tube to use for the amplifier section ECL ... ?
Used a ECL 82 .... not goood ( although physical dimensions and pins were correct ).... Strong smell and PUFFFF !

Replaced old tube ( not able too see which type ) .. it still replay sound !!!

Any help appreciated !

Kind regards

Posted by David Hardy (Member # 4628) on April 21, 2017, 08:35 AM:

The Valves/ Tubes are ; ECH 81 and ECL 86.
I hope this helps

Posted by Niels Peter Buch (Member # 3757) on April 21, 2017, 08:44 AM:

Thank you Hardy.
Much appreciated ! [Smile]

Posted by David Hardy (Member # 4628) on April 21, 2017, 08:55 AM:

You are most welcome Niels.
I hope someone sends you a copy of the circuit diagram.
I have one but it is smudged and unclear and will not copy well. [Smile]

Posted by Niels Peter Buch (Member # 3757) on April 21, 2017, 09:04 AM:

Yes, I hope so !
Great help anyway .
[Smile]

UBB.classic^TM 6.3.1.2