This is topic Sankyo 2000 H problem in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
http://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=012717

Posted by James Wilson (Member # 4620) on January 14, 2019, 08:23 AM:
 
Hi All,
My Sankyo 2000H will not load a film. It will rewind & play forward but will not accept the film, It`s the forward part that does not work. Any Ideas, Perhaps Janice could help?
Best Wishes,
James.
 
Posted by Will Trenfield (Member # 5321) on January 14, 2019, 09:16 AM:
 
Have you checked the front film channel by undoing the chrome screw just above the focus knob? I found a piece of broken film wedged there on one I bought.
 
Posted by Janice Glesser (Member # 2758) on January 14, 2019, 09:38 AM:
 
If you check out the gate as Will suggested and don't find any debris then you next need to check the claw. The claw may need adjustment if not positioned properly to align and pull down the film.

Check out this thread which is also listed on the "Technical Tips" page:

http://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=009946
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2