This is topic Sankyo Dualux 2000-H speed query. in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
http://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=012752

Posted by Will Trenfield (Member # 5321) on January 29, 2019, 06:09 PM:
 
I have a couple of these in working order. When I switch the lamp on, the speed drops but I can adjust the variable speed control to compensate. One of them, though, slows down much more than the other but projects ok. Any ideas?
 
Posted by Nantawat Kittiwarakul (Member # 6050) on January 29, 2019, 07:04 PM:
 
Try "inching" the projector by hand. Does it feels reasonably smooth and without any sticking/binding/squeaking?
 
Posted by Shane C. Collins (Member # 5641) on January 29, 2019, 07:23 PM:
 
I think the speed drop is somewhat normal for this projector. I have a Sankyo 2000H, and mine slightly drops in speed when I switch on the lamp. Not enough that it effects projection but it's there. When I switch back to the forward speed, lamp off, it speeds up slightly.
 
Posted by Kev Morrison (Member # 6338) on February 04, 2019, 09:23 AM:
 
BTW, folks....

If anyone is in the market for a Sankyo Dualux 2000-H, thi is not a bad deal on eBay:

https://www.ebay.com/itm/352585558571?ul_noapp=true
 
Posted by Will Trenfield (Member # 5321) on February 04, 2019, 06:12 PM:
 
Prices must be higher in the US. Mine cost £35 or so each including shipping. That's about $46.
 
Posted by Kev Morrison (Member # 6338) on February 04, 2019, 09:40 PM:
 
Will, they certainly can be higher.

I've seen these projectors listed for less, but you usually get the old "hasn't been tested, no returns" stuff.
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2