This is topic Eumig P8 bot feeding film in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
Posted by David Beattie (Member # 7156) on October 22, 2019, 03:20 PM:
Hi guys. I have purchased my first Eumig P8 which came with many films. I watched a youtube video today which showed me how to load the film. Once plugged in, light came on making the right noise but the film ain't turning, any ideas?
Posted by Leonard Goss (Member # 3172) on October 22, 2019, 04:36 PM:
Maybe needs a new drive belt?
Posted by Tom Dennis (Member # 7149) on October 24, 2019, 01:34 PM:
If motor runs but no drive it is almost certain that the drive belt has perished,it is important that clean the goo off the pulleys before replacing the drive belt.It is MOST important that when you remove the back of the projector you do not plug the mains cord in as the motor is live even when not running!Depending on which model you have some lubrication might be necessary. I hope I am not preaching to the converted with the above advice.
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC