This is topic 8mm and Super 8mm frame enlargements in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=013195

Posted by Steven Oppenheimer (Member # 7187) on November 19, 2019, 01:16 PM:
 
Hi,

wondering if anyone has ever found a working model of one of these frame enlarger and actually used it:

https://www.flickr.com/photos/29504544@N08/8237908403/in/photostream/

Also besides, the wolverine titan scanner being sold, can someone please suggest other means of "blowing up" 8mm and super 8mm frames? I'm not looking to scan a whole reel, just individual frames.

Thanks
Steven
 
Posted by Joe Taffis (Member # 4) on November 19, 2019, 02:05 PM:
 
I used to use something called a "Cinelarger" that was sold back in the 1970s with pretty good results. I remember that you loaded a roll of 120 film in it, and clipped the section of super 8 film with the frame you wanted to capture over an aperture at the top. Then you exposed the 120 film using a flood lamp for a few seconds...
https://www.ebay.com/ itm/TESTRITE-CINELARGER-WITH-INSTRUCTION-BOOK-202796/382907257685?hash=item59270d1355:g:PiQAAOSwZ65cZL2m:sc:USPSPriority!17901!US!-1

the cinelarger uses 120 film, not 35mm. post edited [Wink]

[ November 20, 2019, 06:40 AM: Message edited by: Joe Taffis ]
 
Posted by Steve Klare (Member # 12) on November 19, 2019, 02:28 PM:
 
I remember ones that were a lens for a 35mm SLR. You'd mount the lens, move the film through the 8mm gate, look through the viewfinder and shoot the frame you chose.

I also remember a cheapy that was a single piece plastic camera that used 126 film. I saw it advertised at a photo shop in Manhattan, but never quite got around to buying one when I was running around over there.(-teenager: broke!).
 
Posted by Mike Spice (Member # 5957) on November 19, 2019, 02:54 PM:
 
The Wolverine mod currently underway, has allowed me to pull out some amazing still images, tiff or jpg.
 -
 
Posted by Brian Fretwell (Member # 4302) on November 19, 2019, 02:58 PM:
 
For B&W prints I used to make contact negatives on positive film and make prints with a photographic enlarger. At one time I used a "toy" projector (10w editor lamp) to project on still and take a time exposure for colour prints.
 
Posted by Nantawat Kittiwarakul (Member # 6050) on November 19, 2019, 08:42 PM:
 
A decent DSLR/Mirrorless camera with macro(and extensions) should do the trick as well. May try this out tonight. [Wink]
 
Posted by Ty Reynolds (Member # 5117) on November 20, 2019, 05:15 PM:
 
If you have scanner that can scan slides and negatives, this dealer 3-D prints custom film holders for odd film formats, including 8mm and super 8.

http://www.negative-solutions.com/
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2