This is topic Cocoon Derann Full Feature SOLD in forum 8mm films for sale/trade/wanted at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=2;t=006530

Posted by Kevin Clark (Member # 211) on March 19, 2017, 07:27 PM:
 
This is the Derann release of Ron Howard's 1985 fantasy sci-fi feature Cocoon.

Full details about the movie can be found here:

http://www.imdb.com/title/tt0088933/

Printed on Agfa pre-striped poly stock with a brown stripe it is in very good condition with excellent colour and a loud and clear soundtrack.

On 5 x 600ft spools I have previously kept this on both a 2400ft Long Play spool and on 3 x 800ft spools so there are splices where the print was re-cut to fit.

There are no green emulsion scratches just some very fine black lines to the far edges of the picture on part one and very occasionally on the other parts. Cleaning will improve these and I can apply Filmgaurd before posting if you would like just let me know.

There is also a section of printed in negative damage that lasts about 30 seconds towards the end of part four.

Don't let this put you off though it is an excellent film and one that doesn't turn up for sale too often.

I am asking for £220 which includes insured postage to mainland UK addresses - I can also post Internationally which will incur an additional postage charge depending on your location. NOW SOLD THANK YOU

Kevin

[ March 20, 2017, 04:29 AM: Message edited by: Kevin Clark ]
 
Posted by Mark Todd (Member # 96) on March 19, 2017, 08:11 PM:
 
Nice to see a well described and good value print up for sale.

Great film too with some great actors.

Nice one for any collection.

Best Mark.
 
Posted by Andrew Woodcock (Member # 3260) on March 20, 2017, 12:44 AM:
 
PM sent Kevin.
 
Posted by Kevin Clark (Member # 211) on March 20, 2017, 04:30 AM:
 
Thank you for your messages Mark & Andrew,

Cocoon is now sold.

Kevin.
 
Posted by Del Phillipson (Member # 513) on March 20, 2017, 05:49 AM:
 
Missed that one Kevin, would have loved it [Frown]
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2