This is topic Elmo ST 1200 part needed.. in forum 8mm equipment for sale/trade at 8mm Forum.

To visit this topic, use this URL:;f=3;t=000985

Posted by John Capazzo (Member # 157) on February 11, 2010, 07:52 PM:
Would anyone have the tension spring for an Elmo ST 1200? This is for the original ST 1200 machine (greenish) and it needs the spring that belongs near the top (when rear cover is removed) that keeps tension when changing 24/18. Without the spring, it won't rewind and engange properly. I also need the lamp setting knob. It's a cosmetic piece that smilply slips on the metal lamp switch when setting from off to 100-150 W. Thanks for any searches/help.--John
Posted by Robert Oakley (Member # 141) on February 13, 2010, 05:14 PM:
Can you send me a photograph, I got a ST 1200 parts machine.
Posted by Gian Luca Mario Loncrini (Member # 1417) on February 14, 2010, 02:31 PM:
John, contact also Mr Petrin, in case:

luigi.super8cine (at)fastwebnet (dot) it

Good luck.
Posted by John Capazzo (Member # 157) on February 15, 2010, 05:15 PM:
Robert, are you willing to sell the entire machine as is? Thanks--John
Posted by Robert Oakley (Member # 141) on February 17, 2010, 10:21 PM:
Yes I can sell it - Email me and we'll discuss it.

Visit for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation