This is topic WANTED - DJL Lamp for B&H 456A in forum 8mm equipment for sale/trade at 8mm Forum.


To visit this topic, use this URL:
http://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=001676

Posted by Herb Finn (Member # 2897) on July 01, 2012, 01:22 AM:
 
I'm looking for affordable DJL Bulbs or substitution for my Bell & Howell 456A

Is there an acceptable substitution that would fit it?
 
Posted by George Tveden (Member # 3379) on April 06, 2013, 09:39 PM:
 
Hi Herb,
I have used MR16 type lamps to convert many old Bell & Howell projectors like the 456. If you don't mind modifying your projector by mounting a GE-QLV-1 lamp socket, and then popping in an MR16 Halogen or Xenon lamp like an ESD or EZK you can save a lot of money, complete a fun project, and have a better projector set-up with longer life lamps. Also, DJL plug-in modules are available on the internet for those folks that don't want to drill holes in their projectors. Hope this helps, good luck!
 -
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2