This is topic Elmo FP-C in forum 8mm equipment for sale/trade at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=003157

Posted by Don Krepps (Member # 6078) on September 14, 2017, 05:22 PM:
 
I just relocated my Elmo FP-C super 8 dual projector after it being misplaced for about 20 years. Ready to view about 1200 ft of family film, but, the lamp cover is missing, and I believe it is necessary to direct the flow of the cooling fan air. I think I'll have to fabricate one, but the only pics I can find show it installed. Would anyone be able to post pics showing all aspects of it? I think I can work out the measurements from any pics and my projector. Thanks for any help!
 
Posted by Janice Glesser (Member # 2758) on September 14, 2017, 07:06 PM:
 
Welcome to the forum Don!

I have a lamp cover off a FP-C if your lamp socket looks like this:
 -

The cover looks like this:
 -

You can try and make one or I'll sell you this one for $15 +shipping.

PM me if interested.
 
Posted by Vincent Zabbia (Member # 2453) on September 17, 2017, 11:03 AM:
 
HI: Does this part do the trick? Lamp cover from an Elmo FP-A
 -
 -
 -
 -
 -
 
Posted by Janice Glesser (Member # 2758) on September 17, 2017, 01:34 PM:
 
Actually the FPC has a different latch at the top then is on the FPA. I'm sure it could be modified to fit the FPC. Don bought the one I had from my FPC so he should be set to go now.
 
Posted by Vincent Zabbia (Member # 2453) on September 17, 2017, 07:55 PM:
 
Great
 
Posted by Don Krepps (Member # 6078) on September 17, 2017, 09:06 PM:
 
Thanks Vincent...Janice has me taken care of.
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2