This is topic Beaulieu 708 rear arm/Take up arm needed- in forum 8mm equipment for sale/trade at 8mm Forum.


To visit this topic, use this URL:
http://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=003162

Posted by Alan Rik (Member # 73) on September 21, 2017, 08:44 AM:
 
Hello. I know this is a long shot but does anyone have a rear Take up arm for the Beaulieu 708? My machine's arm was damaged in transit from Germany to the USA.
 -

Any help would be greatly appreciated!
 
Posted by Manuele Bossolasco (Member # 4531) on September 21, 2017, 10:28 AM:
 
Hi dear Rik,

I could give it a try to help you to find a spare part of the rear take up arm for your Beaulieu 708 here in Europe.

I've already tried to ask some of my contacts if they might have it.

I'll let you know if I'll get good news! [Smile]

All my best!

Manuele
 
Posted by Alan Rik (Member # 73) on September 21, 2017, 10:32 AM:
 
Thank you so much! It is very much appreciated.
Finding a Beaulieu out here in the states is like pulling Hen's teeth!
 
Posted by Andrew Woodcock (Member # 3260) on September 21, 2017, 01:33 PM:
 
I don't have any spares like this of course Alan but I sincerely hope someone does have them here for you.
 
Posted by Stuart Reid (Member # 1460) on September 21, 2017, 01:41 PM:
 
Bill Parsons may still have the written-off early model of mine, perhaps he could help?
 
Posted by Alan Rik (Member # 73) on September 21, 2017, 02:57 PM:
 
Thanks Stuart,
I'll shoot him an email.
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2