This is topic Cir or similar type splicer for standard *mm wanted will trade for super 8 in forum 8mm equipment for sale/trade at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=003188

Posted by Kenneth DePriest Jr (Member # 3212) on November 11, 2017, 08:36 PM:
 
so I accidentally bought TWO ciro deluxe metal splicers, one I have says "super 8" and it is. I have sone that just says "8mm" and while getting frustraited that the Standard 8 film wouldnt fit on the sprocket area, I then discovered it is actually a super 8 splicer that does not mention that fact on the label area. one of the hold down arms is missing but the splicer still works perfectly as long as you are using super 8 film. I have another that I bought for 16mm but it looks like the super 8 one but the matrix is 16mm wide. since it is a wrap around splicer you cannot use it for standard 8. let me know if you have one or wanna stade for a super * ciro. thanks!
 
Posted by Kevin Hassall (Member # 2352) on November 12, 2017, 02:48 AM:
 
I think Barry at indi8 has one buddy .
 
Posted by Chip Gelmini (Member # 44) on November 12, 2017, 05:22 AM:
 
Is the one with the 16mm matrix labeled "m3 special? If yes I might be interested in buying it let me know
 
Posted by Maurice Leakey (Member # 916) on November 12, 2017, 09:58 AM:
 
Independent 8 have two CIR tape splicers for sale.
One is for Super 8, and the other is for standard 8.
http://www.bfcc.biz/independent8equipment.html
 
Posted by Kenneth DePriest Jr (Member # 3212) on November 12, 2017, 12:59 PM:
 
Thanks a ton fellow film people I just wrote indi 8 I had found the actual CIR website. and they required a bank transfer for payment and I didnt feel comfortable doing that. Chip, it doesn't say that on the matrix, but it is for sale if someone needs a Metal super 8 ciro. They really are the best splicer I have used and all projectors seem to like splices made with them.
 
Posted by Janice Glesser (Member # 2758) on November 12, 2017, 03:38 PM:
 
Kenneth...I bought my standard 8mm cir splicer for Ewan Colsell. He has Super 8 and Standard in both metal and plastic.

https://sites.google.com/site/cirsplicers/

Payment was simple thru PayPal.
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2