This is topic Bell & Howell Filmosound 535 Lubricant & Oil? in forum 16mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=5;t=001651

Posted by Owen McCafferty (Member # 6010) on August 02, 2017, 09:47 AM:
 
Hi All,

I'm going to be replacing the worm gear in my Bell & Howell Filmosound 535 and from what I've been reading, part of the problem the worm gears failed was the lube the factory applied to it. I want to clean it all off the other gears too, but what should I replace it with? Also, what kind of oil should I use for other parts?

Thanks!
Owen
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2