This is topic Elmo 16CL Rear Tension arm in forum 16mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=5;t=001890

Posted by Stuart Hilliker (Member # 737) on October 24, 2018, 03:54 AM:
 
I'm looking for a rear tension arm for an Elmo 16CL. Would anyone happen to have a spare? Looks like metal fatigue broke mine!
 -
 
Posted by Mark Mander (Member # 340) on October 24, 2018, 04:38 AM:
 
Hi Stuart
PM sent, Mark
 
Posted by Mark Todd (Member # 96) on October 24, 2018, 05:26 AM:
 
Just as this is on here I need one of the rollers shown please, anyone.The screw would be handy too.

Best Mark.
 
Posted by Stuart Hilliker (Member # 737) on October 24, 2018, 06:05 AM:
 
Hi Mark. Thanks to the generosity of a fellow forum member I may have what I need. If it fits, you are welcome to the roller and screw from my broken part. The roller itself is also damaged, so you may not want it!  -
 
Posted by Richard C Patchett (Member # 974) on October 24, 2018, 11:57 AM:
 
Greetings
I have the parts that you may need
P 412339 Guide Roller 4 $7.70 (on web site)
4P55595 Screw Guide Roller 4 $2.00 (Not on site) ask
P412051D Lever Guide Roller 4 $30.00 (Not on site) ask
Plus many other Elmo parts
RC
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2