8mm Forum: Sell Muray W rewinders (SOLD)

This is topic Sell Muray W rewinders (SOLD) in forum 16mm equipment for sale/trade at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=7;t=000958

Posted by Luigi Castellitto (Member # 3759) on December 28, 2017, 05:45 PM:

I sell two rewinders type Muray "W".
I have not tested them with an editor viewer (so, them are "not tested" product), but they seem to work very well: the frictions works, and also the two rewinding speeds works (and also the "neutral" position).
With two 16mm gauge adpaters on arms.
I'll post photos, for now you can look at the model on the Graham page: http://www.pathefilm.uk/95gear/95gearaccess.htm
30 euro + shipping cost.
Thank you. [Smile]

Posted by Terry Sills (Member # 3309) on December 29, 2017, 02:25 AM:

Luigi
I will take those. How much is shipping please.

Posted by Luigi Castellitto (Member # 3759) on December 29, 2017, 10:48 AM:

Ok, Terry, thank you, I'm going to the post office tomorrow morning, and I inform you.
For Weymouth, Dorset, England?
In the evening I also send you some photos.

Posted by Terry Sills (Member # 3309) on December 29, 2017, 11:58 AM:

Yes Luigi
Weymouth, Dorset is correct. Look forward to the photos.

Posted by Luigi Castellitto (Member # 3759) on December 29, 2017, 04:29 PM:

PM for you! [Smile]

Posted by Terry Sills (Member # 3309) on December 30, 2017, 02:12 AM:

Luigi
I cannot see much detail from the photo. It is very fuzzy (unclear) but they are the type I am looking for. Postage is very high but if they are working that is ok. Can I just ask - why have you not tested them?
Terry

Posted by Luigi Castellitto (Member # 3759) on December 30, 2017, 10:16 AM:

In the evening I take better photos! [Smile]

I can test them by fixing them at a table, but right now I don't have a 16mm viewer, it's on loan.
I can trun the various speeds without passage in the viewer.
I update you!

Posted by Terry Sills (Member # 3309) on December 30, 2017, 11:36 AM:

Thanks Luigi
You don't need a viewer to test the rewinders, just a film and a take-up reel. You set the film reel on the neutral position and then you can test both speeds on the take-up reel and change over to test the other rewinder.

Posted by Luigi Castellitto (Member # 3759) on December 30, 2017, 06:21 PM:

Everything seems OK. It's all smooth, the two speeds work with both winders. Even the frictions, the knob gets to be hard when turn.
As you can see from the video, the "neutral" position stop the rewinder that you are not using; very useful.
Only one: I remembered that by switching from one speed to the next, they would take a "tlak", instead no, they are "smooth", without block in position. Maybe I get mixed up with other rewinders, I don't know.
It seems they don't need oil. I never open them, the Muray have fragile mechanisms, but if you want I can open them.

If you have doubts because of the costs or other, don't worry, take them only if you're really convinced. [Smile]

I can get off at 25 euros, because are not tested with viewer and I don't remember the thing of move form speed to speed.

https://www.youtube.com/watch?v=_qtW4BH68GU&feature=youtu.be

Posted by Terry Sills (Member # 3309) on December 31, 2017, 01:40 AM:

They look great from the video Luigi. Thank you very much for that. Let me know the total please and how to pay. If it is by PayPal I will send it as a 'gift' so that there are no deductions.
Terry

Posted by Luigi Castellitto (Member # 3759) on December 31, 2017, 07:56 PM:

Sold to Terry! [Smile]

Posted by Terry Sills (Member # 3309) on January 03, 2018, 09:02 AM:

Luigi
Got your message thank you but can't reply because your mail box is full [Smile]

Posted by Luigi Castellitto (Member # 3759) on January 08, 2018, 01:44 PM:

Thank you, Terry, now is Ok.

UBB.classic^TM 6.3.1.2