This is topic I am looking 16mm p8 Bauer in forum 16mm equipment for sale/trade at 8mm Forum.


To visit this topic, use this URL:
http://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=7;t=001054

Posted by Antoine Orsero (Member # 41) on January 23, 2019, 08:00 AM:
 
I am looking for the small Bauer 16mm P8 projector presser stopper part or the complete lens holder without lens with presser and presser stopper
 -
 
Posted by Renzo Dal Bo (Member # 5688) on January 30, 2019, 09:53 AM:
 
Hi Antoine,

last evening I used my Bauer P8 to watch my last 16mm feature movie purchased on eBay.
Remembering your post I disassembled the lens holder to clean it and so I pulled away that tiny part you are looking for.
I noted it has a simple geometry. So fitted with a caliber, I took its measures and drew a 3D model of the presser stopper.
If you don't find an original spare part, I could gladly send you the 3D-drawing for free.
For sure in Marseille there are some firms that do the 3D printing service.
Such tiny part needs the highest resolution 3D print, but its cost shouldn't be very high because this is a very small part.
Otherwise you can also find such service on the web.

Renzo

 -
 
Posted by Rob Koeling (Member # 35) on January 31, 2019, 03:20 AM:
 
That is amazing Renzo! That is so incredibly thoughtful of you.
That made my day!

- Rob
 
Posted by Renzo Dal Bo (Member # 5688) on February 03, 2019, 04:18 PM:
 
Thank you Rob, for your kind words.

Renzo
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2