This is topic Speed control for 9.5mm Gem projector in forum 9.5mm Forum at 8mm Forum.


To visit this topic, use this URL:
http://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=9;t=000325

Posted by Vic Newey (Member # 5181) on December 27, 2015, 05:20 AM:
 
Hello everybody, I have a couple of 9.5mm projectors & a big box of films in the loft that I bought in the 1960's but not looked at them for decades.
I have just purchased a cheap 9.5 Gem with a pile of WW2 newsreels & the speed control only works with the slider to the far left but doesn't seem very fast, the wiring has rust spots so presumably is broken in several parts.
I can see references to rewiring it & it looks easy enough but i can't find a difinitive answer to the resistance wire guage I need to get & how many metres it needs. Can anyone advise please
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2