This is topic Spring belt length needed for Bingoscope/Astor/Hunter in forum 9.5mm Forum at 8mm Forum.
To visit this topic, use this URL:
Posted by Billy Blair (Member # 6068) on April 20, 2018, 03:45 PM:
Im hoping to appeal those on this forum would know what the length and thickness of the spring belt used on this projector is?
(Photo is not of my projector). I'm converting mine to a telecine so I can capture movies to bluray but it came missing the belt and its not easy find one! I bought one off pathefilm.uk which was too small causing the film to get yanked.
Any help appreciated!
Edit: Reworded slightly.
Posted by Billy Blair (Member # 6068) on April 23, 2018, 12:42 PM:
Bought a spares projector and it came with the spring. Its 367mm (14.5") in length including the hooks if anyone's wondering.
Posted by Luigi Castellitto (Member # 3759) on April 24, 2018, 07:32 PM:
Billy, it have a speed selector with knob?
Posted by Billy Blair (Member # 6068) on May 30, 2018, 04:14 AM:
quote:Its hand cranked so itll play at whatever speed you crank it at!! Im using mine as a telecine device so fitted it with a stepper motor.
it have a speed selector with knob?
You can get ones with motors and a giant stepdown which reduces mains voltage. Like on this page near the bottom:
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC